My 25.5 coupe project

adam351 said:
looks sweet joe
Click to expand...

Thanks:thumbsup: I'm off to the garage to try and get a little more done today. The wife had minor surgery Friday morning, so this weekend has kinda' been on hold. But, all is well and she is home now!
 
Last edited:
Thanks, been doing more work this week. I finished welding shut the rest of the holes in the interior sheetmetal- shifter, park brake, fresh air intake in cowl, and trans wiring grommet hole. Masked off the body and sprayed the firewall/floor, then painted the cage with the silver "hammered" finish. Ready to start interior assembly soon.

100_0006.jpg

100_0008.jpg

100_0007.jpg
 
Do you mean the rectangular hoop? I used 3/8" chome moly tuning and fabbed that up to hold an alluminum panel for the fuses/relays, just behind the glove box area. I may trim out the glove box door from the dash so the panel is exposed, and maybe hold the removed portion back onto the dash with a couple dzus tabs so it looks more finished(maybe just leave it off...)
 
JoeP. said:
Do you mean the rectangular hoop? I used 3/8" chome moly tuning and fabbed that up to hold an alluminum panel for the fuses/relays, just behind the glove box area. I may trim out the glove box door from the dash so the panel is exposed, and maybe hold the removed portion back onto the dash with a couple dzus tabs so it looks more finished(maybe just leave it off...)
Click to expand...

No. I knew that was for electronics.

Looks like in the one pic where the floor meets the tunnel it has been te worked for clearance maybe??

I am looking at the pic on my phone maybe it is glare.

I just returned your pm
 
Ah. Nothing I did there, but the car had a few small "clearances" from it's past life in the trans/firewall area, maybe that's what it is from. I never noticed that one honestly LOL.
 
Thanks! Not too much progress this week with X-mas. I did install my new old stock Carlite quarter windows and drip rail mouldings, and recovered an old grey headliner in the correct black material, filling in the holes for the dome light and visors that I won't be needing. Thanks to hangemhigh for the hookup on these parts, I'll be returning the favor soon! I also threw in a shot of the motor with the Barnes 5 stage dry sump pump all mocked up. Hope everyone had a Merry Christmas!!!

100_0018.jpg


100_0019.jpg


100_0020.jpg
 
Last edited:
that is insane !!!!!!!!!!!!!!!!!!!!! i love the cage hey thanks again for the gear i haven't yet installed it yet.i am working my way to it though still alot of work to do though.
 
You must log in or register to reply here.
Back
Top