Twisteds 82 GT build

allthrottle said:
My 347ci 76mm with stock ECM and procomp heads went 9.16 on rev limiter at 1000'.. Few things have changed this yr. ��... You will have no issues spooling unless u have a huge T6 flange turbo.
Click to expand...
I have a 80mm 1.36 ar with a t6 flange.......
 
TWISTED said:
I ordered my arp head bolts yesterday along with head gaskets. Ordered my sfi flywheel and crank adapter for the Chevy convertor last week. So the remaining list is.....
1- rockers
2- pushrods
3- convertor
4- carb
5- regulator
6- fuel lines and trans lines
7- radiator and fans
8- driveshaft
9- wastegate
10- blowoff
11 build hotside and coldside
Click to expand...


Are u building your own headers or using shorties flipped around
 
I've got a set of 1 3/4 shorties that I welded v band flanges onto and then had leidecker weld on a set of flanges to get to the hooker pattern. I'm not real thrilled with the flanges so I'm probably gonna do a another set myself.
 
Still stockpiling parts. I picked up a flex joint for my hotside, some header wrap, and some silicone couplers.
 
It will spool just fine if you can tune it properly....and it will handle more than 10psi. You can definitely have fun with what you have. Would better if it was EFI though. Car is beautiful, can't wait to see it out.
 
IMAG0881_zpsb6f26fb4.jpg
Bigg came over today and we got the longblock together
 
I was more scared working on this with you then anything ever!
I kept saying to myself ... Don't scratch it , don't scratch it.....
 
You must log in or register to reply here.
Back
Top