Winter Repair - 418" Turbo Mustang - E85

Got the motor in over the weekend. Hope to have it running this weekend.....and am hoping for no issues.

7F8F29E3-C7D9-4EA5-B931-8F1ECE6C353B_zpsvxpujtiq.jpg


5616DCC4-D379-45DE-9B6B-450F0D511452_zps112fgvhx.jpg
 
FP Regulator Bracket turned out nice.
BDF399CD-95C6-4BDF-A73C-0C66A5218C9D_zpszn2iiwr3.jpg


0E6CB910-1453-4165-8D43-14DDEA62FA23_zpsz8g8bfyj.jpg


motor is done except I have to modify the charge pipe since the TB is a slightly different location.
D6F1404A-7D6B-47AA-8855-CF9C08E8ADA4_zpss3ihkbgh.jpg
 
Hey Tim how much power you think those stock windsor blocks can hold? mines a 74 non roller block just wondering what you think since you have run one for so long
 
Hey Tim how much power you think those stock windsor blocks can hold? mines a 74 non roller block just wondering what you think since you have run one for so long

I don't usually talk in terms of power....but more so in ET.

SBF Stock Windsor's can run high 8's before they start to break.

Someone locally ran low 8's with a stock windsor using a nitrous combo........
 
Drop it off to me, I'll weld it tonight and bring it back tomorrow..
My welds will look better then what is already on the pipe.. :)

I'll drop it off to you tomorrow. I need it tacked first so I can fit it before final weld.

What time will you be at work tomorrow?
 
I'm here at 2:30pm. Only issue with tomorrow is that I wont be back in Farmington after tomorrow until Monday because of the holiday. I'm sure you will want it back before the weekend.
 
I'm here at 2:30pm. Only issue with tomorrow is that I wont be back in Farmington after tomorrow until Monday because of the holiday. I'm sure you will want it back before the weekend.

That's ok. I am actually gonna try to drive it to my Dad's house and weld it there.....just thought I could save myself the trip.

Next time I will take you up on it.
 
got the charge pipe welded up....
7EA46974-BAE3-464D-8C60-82B688387B34_zpsnohktm5y.jpg


Now I need to reconstruct the entire cooling system as I have finally figured out my cooling issue.
 
Back
Top