NO!!! Simply the driver will be to limiting factor. The new Shelby is going to devastate that ZL1.. This is a video of a 5.4L Shelby with bolt on's.. What do you think in going to happen with a bigger better motor, heads, intercooler, and the simple fact they can bolt on a slick and launch the car without having to worry about half shafts flying into the bleachers.. cute video though, looks intimidating lol
Maybe you ought to read the Livernois post from earlier.....
Plus...this video is kinda missing the target....look at the mods...on C16 with a 4.0L whipple....really?
Another great night at the track. The Lethal Performance 2010 GT500 made its way deeper into the 9's cracking off a [email protected]. The weather was in the 60's with a little bit of moisture in the air. Jeremy Martorella of UPR Products pulled the car up to the line for our first run of the evening. With the 2 step set at 2100 he made the launch. First gear looked awesome and so did the 1-2 shift.. However after the shift the car broke loose and started going sideways but Jeremy's professional race experience got the car back in the groove and down the rest of the track shifting as fast as an automatic could. As he passes the traps the board lit up with a [email protected]. The car ran 114.14mph through the 1/8th. This is still using a 4" pulley on the 4.0L Whipple which produces 21.5psi. We were using C16 with no methanol and this is blower only. We're going to continue working on the suspension and once it's dialed in we'll turn up the boost. Our goal is to make an 8 second pass with the 6 speed making it the first GT500 in the 8's with a manual transmission.
Big thanks to everyone involved. UPR Products, Whipple Superchargers, Boss330 Racing, Kris@ Champion Racing Heads, Power By the Hour, Jon Lund, Revan Racing, Shelby Performance, Steeda, Autosports, BMR Fabrication, SCT, Fore Precision Works, Reische Performance, Mustang Racing Performance, Bogart, Mcleod Clutches, Moroso Performance, The Driveshaft Shop and lastly all of our families, friends and customers for all of their support.