Used 9" center section

[jdustu]

If anyone has any lines on a used center section, let me know. I'm not picky on the gear ratio, pretty much anywhere in the mid to upper 3s would be preferred. I'm using 31 spline axles too.

I'd like to spend less than $500, otherwise I might just put the stock rear back in for now.

Thanks in advance!

-Josh

 

[jdustu]

Bump

 

[DarkoStoj]

i got a stock 28 spline unit for $40 if you want it. You could stick a spool, regear it and finish it all for under $500

 

[jdustu]

i got a stock 28 spline unit for $40 if you want it. You could stick a spool, regear it and finish it all for under $500

I may do that. I'll get back with you.

 

[coupefastback]

I have two of them. One is a 3.50 and the other is a 3.89 with an auburn posi unit. The 3.50 is supposed to be a fresh rebuild. I have never used it. The 3.89 I bought from a friend of mine when he went to a spool. I would like $350.00 plus two T-shirts for either one. I am in St. Johns so I know it is probably a little farther than you want to travel.
Thanks
Jim

 

[jdustu]

I have two of them. One is a 3.50 and the other is a 3.89 with an auburn posi unit. The 3.50 is supposed to be a fresh rebuild. I have never used it. The 3.89 I bought from a friend of mine when he went to a spool. I would like $350.00 plus two T-shirts for either one. I am in St. Johns so I know it is probably a little farther than you want to travel.
Thanks
Jim

I'll make the trip if i can't find anything closer. How much abuse has the posi seen? I'm assuming the 3.50 is an open unit?

 

[phatstang]

I have two of them. One is a 3.50 and the other is a 3.89 with an auburn posi unit. The 3.50 is supposed to be a fresh rebuild. I have never used it. The 3.89 I bought from a friend of mine when he went to a spool. I would like $350.00 plus two T-shirts for either one. I am in St. Johns so I know it is probably a little farther than you want to travel.
Thanks
Jim

good honest guy to deal with.....

 

[coupefastback]

I'll make the trip if i can't find anything closer. How much abuse has the posi seen? I'm assuming the 3.50 is an open unit?

The 3.50 is a posi unit. The person that had the auburn had a 13 sec mustang with a c-4. He did not race a lot. I bought it because i knew it would be in good shape.

 

[jdustu]

The 3.50 is a posi unit. The person that had the auburn had a 13 sec mustang with a c-4. He did not race a lot. I bought it because i knew it would be in good shape.

I think I may jump on the 3.89....I'll pm you this week.

Thanks

Josh

 

[jdustu]

I bought the center section from Jim(coupefastback). Great meeting you Jim, good luck with your projects and thanks again!