Twisted Wedge

LMaggz

LMaggz

Forum Member
Okay... trying to be the 'good girlfriend', Im buying Heads for the boyfriends mustang. Anyone heard bad/good things about twisted wedge? Should I get em, or is there something else that you guys recommend? Not lookin to spend 3 grand, but also not lookin for cheapies. Lemme know!
 
VanFaasenC said:
YOU ARE A GREAT WOMAN!!! DO YOU HAVE ANY SISTERS???
Click to expand...


True dat!

That aside, its a very good head right out of the box. Just be sure he uses the correct length pushrod, stock length pushrods will not work. The length he needs will be determined by the cam he is using.

That's a great gift! :peelout:
 
Captain Chaos said:
True dat!

That aside, its a very good head right out of the box. Just be sure he uses the correct length pushrod, stock length pushrods will not work. The length he needs will be determined by the cam he is using.

That's a great gift! :peelout:
Click to expand...

Hes got a B303 Cam. Will he still need different pushrods?
 
LMaggz said:
Okay... trying to be the 'good girlfriend', Im buying Heads for the boyfriends mustang. Anyone heard bad/good things about twisted wedge? Should I get em, or is there something else that you guys recommend? Not lookin to spend 3 grand, but also not lookin for cheapies. Lemme know!
Click to expand...

the Trickflow Technologies Twisted wedge Small block ford/ chevy heads are an excelent value. There are sevral porters that rework these heads and sell them complete on the internet for more performance. However out of the box these heads direct from trickflow are still excelent performers. Check summitracing these things are bargian priced they also have a complete upper end setup with intake manifold that works very very well. I would recomend them.

As for pushrods they will need to be measured once the heads are on.
 
Well so far, Ive helped him rebuild the engine, failed miserably at the auto parts store trying to get valve covers, Im getting it repainted in March, and Imma buy heads. Id say that Im doin damn good!
 
The TW heads work great IMO. I've been using the small block ford version since they came out way back in the day. You can get away with more cam with those than other large valve head because of where they put the intake valve. It also unshrouds it a little more. Be careful when comparing intake runner volume to other heads, because the runner is effectively a bit shorter than other heads, you can't compare the numbers directly.

I've used mine to make 300, 400, 500, 600, 700, 950, and now maybe more HP.
 
LMaggz said:
Thanks but, Ive already got the Rockers, Intake, Camshaft, Pushrods, Timing Set, Valve Covers, and Gaskets. Just lookin for the heads.
Click to expand...


Well you can get just the heads. I didn't know exactly what you had.
 
Ugh. All so confusing. Okay. So heres what I'll do then. Buy the heads and he can figure the rest of the crap out. LOL
 
Okay... Got another question. How much faster will decent heads make him? Are we talkin seconds? Or just hundredths?
 
LMaggz said:
Ugh. All so confusing. Okay. So heres what I'll do then. Buy the heads and he can figure the rest of the crap out. LOL
Click to expand...

Wait a minute...aren't you the girl with the 50" boobs?! :icon_eek: :icon_eek:

He's get that AND car parts?!?!! :humpingsm :humpingsm
 
How have we gone this many posts without a single recommendation of giving him some of her own "twisted head action"
 
Captain Chaos said:
Wait a minute...aren't you the girl with the 50" boobs?! :icon_eek: :icon_eek:

He's get that AND car parts?!?!! :humpingsm :humpingsm
Click to expand...


Damn. Youve got yourself a kick ass memory. LOL Yes. That would be MEEEEEE!
 
You must log in or register to reply here.
Back
Top