Trying to fit a 28x10.5-15 on my Fox. What backspacing?

[cjmatt]

What backspacing do I need when running a wider sn95 5-lug rear axle? when running a 10.5 wide should I use an 8 inch or 10 inch wheel?

 

[Fryguy302]

It will work better with a 10" wheel. For a standard length FOX rear, you'd use a 15x10 with a 6.5" backspacing. I'm not sure how much wider the sn95 one is, but if it's 1" wider per side, you'd run 1" more backspacing, or 7.5".

 

[LITTLEMAGS]

^^you will need to "masage" the inner fender well a "little"...

 

[2hipsi]

is it a 94-98 axle or a 99-04?

 

[Fryguy302]

^^you will need to "masage" the inner fender well a "little"...

Very true, you'll need a BFH and some patience.

 

[LITTLEMAGS]

^^ the patience...yeahhhh....patience..haha

 

[cjmatt]

It will work better with a 10" wheel. For a standard length FOX rear, you'd use a 15x10 with a 6.5" backspacing. I'm not sure how much wider the sn95 one is, but if it's 1" wider per side, you'd run 1" more backspacing, or 7.5".

theyre 3/4 wider per side than a standar fox. unfortunately i dont think anyone makes a 7.25 backspacing drag wheel that Ive seen in a 15x10...theres gotta be someone doing this

 

[1nine84GT]

^^you will need to "masage" the inner fender well a "little"...

I think he Is an engineer... So get the BFH out & make then fit !

 

[cjmatt]

I think he Is an engineer... So get the BFH out !

ill get them to fit on the inside. I just hate when they stick out too far. Ive got a set of 26s right now that look ok, but i dunno what the backspace is on the wheels and i dont think theyll work with a 28

 

[soap]

What backspacing do I need when running a wider sn95 5-lug rear axle?

is it a 94-98 axle or a 99-04?

SN95 = 94-98

--Joe

 

[cjmatt]

well, supposedly my wheels are 15x8 with 5" backspacing.

So I guess it looks like im gonna be getting them each widened 2 inches on the backside