Think these would work?

[MidnightG6V6]

Well ever since i lowered my car the camber has been off on my back tires. i went and had some work done to fix them some but they are still off. i was looking on line and i found these http://www.pfyc.com/pc/GN4009/G6SUSP/Camber+Adjustment+Kits.html
can anyone help me and tell me if these should do the trick, went to the dealer but they said they thought so but not 100% sure

thanks in advance for any help

 

[GTPprix]

It should, cheap enough to try and see if it helps

 

[MidnightG6V6]

how would i know how many degrees off my cambers are? cuz it says each one is good for +/- 1 degree so if im 2 degrees i would need 2 sets

 

[GTPprix]

Take it to an alignment shop IE belle tire and see if they can take up the extra slack first. Worst case scenario they should be able to tell you how far out of spec it is and go from there.

 

[MidnightG6V6]

sounds good

 

[Sean]

Depending on the strut these do not take up enough camber if the car has been lowered more then 2 inchs. At that point you most likely need to modify the strut tower and lower control arm pickup points to get the needed amount of adjustment.

 

[MidnightG6V6]

well the kit that i put on my car was only a 1.4" lowering kit but after it settled its a little more but should be less than 2 inches