SBF Header Adapter

[bottlefed93]

Iam looking for an adapter plate for headers for putting a Trick Flow/Ford J302 diagonal bolt pattern.to a stock style head (twisted wedge)

 

[THOR84GT]

so you need the stock 2" bolt pattern to the diagonal bolt pattern that is on the TFS high port and the TFS-R heads? If so I have a set in the garage $50
http://www.kookscustomheaders.com/show.php?pid=240

 

[bottlefed93]

so you need the stock 2" bolt pattern to the diagonal bolt pattern that is on the TFS high port and the TFS-R heads? If so I have a set in the garage $50
http://www.kookscustomheaders.com/show.php?pid=240

pmd you

 

[TURBO'D 428 C.I. STANG]

all i got to say is thats what i have for my kooks, and fuck i hate them....bolts come loose cause you have a 1/4 to thread into....there felt like mat'l gaskets burn up in like 500 miles.....but i guess there isnt really any other option or i would have dont it....hope you have better luck than i do...

 

[bottlefed93]

all i got to say is thats what i have for my kooks, and fuck i hate them....bolts come loose cause you have a 1/4 to thread into....there felt like mat'l gaskets burn up in like 500 miles.....but i guess there isnt really any other option or i would have dont it....hope you have better luck than i do...

ya me too

 

[MAXAMUS]

If you dont get the ones from thor I have a set also for same price. I use RED HIGH temp silicone on mine and dont have a problem. I put a small dab on the bolts also. Or you can get lock washers designed for counter sunk bolts.

 

[bottlefed93]

If you dont get the ones from thor I have a set also for same price. I use RED HIGH temp silicone on mine and dont have a problem. I put a small dab on the bolts also. Or you can get lock washers designed for counter sunk bolts.

I did pick the ones up from Thor but thanks for the info on how to seal them though i will give it a try