Project Pro Street 67 Camaro

Got the car outside in the sun today and started polishing. Lot left to do but it's looking like a car again!

16381890324_45a7a96db8_b.jpg


17002885462_1aa04719ff_b.jpg


17003441741_4f223e108c_b.jpg


17003432821_ab7813d6cc_b.jpg


17004321195_edcdc9c9b4_b.jpg


17002881742_6332161f7b_b.jpg
 
Got the car home this past weekend. Going to start on the interior and put the fuel system back in this weekend. Ordered new glass as well.

1618630_10204114220922379_5244806257643683991_n.jpg
 
Did a little more waxing on the paint today while I wait for parts to show up. Got my Rossler Terminator 3 pro brake transmission yesterday. Hoping the short block will be ready for assemble this week. Nothing too crazy for now, just a pump gas 468.

11040602_10204174445027944_7156351000829530521_n.jpg




Here is a before picture, there were a few small spots of hazing from buffing after wet sanding. Hit all of those with some rubbing compound and wax today.

17009428557_8fa2e2eae1_b.jpg


And after...a little better!

17215043412_b870312e75_b.jpg


17216338031_daf68e3100_b.jpg
 
468 is all together. Won't be long now until things start falling into place! Just some basic junk. 4 bolt block, stock rod and piston, .060 over JE pistons11.0:1, JEG's 320cc aluminum heads, comp cams hydraulic camshaft around .640 lift, Edelbrock Victor JR intake, Holley 750cfm dominator, and a plate pilled for 100.

11027484_10204202189201531_197464498496901905_n.jpg
 
hey....


Ive been workin my ass off on the F100.... when are you gonna send that Helper over?.....

and oh yea that engine looks killer are you going to DYNO it before you put it in the car?
 
Golden said:
So bad ass. Cant wait to see it done.
Click to expand...

Thanks man, me either! Worked on it for a while last night. Spent a couple hours cutting and polishing the motor plates. It's the little things like that, that are keeping progress on this thing slow.

derbydad276 said:
hey....


Ive been workin my ass off on the F100.... when are you gonna send that Helper over?.....

and oh yea that engine looks killer are you going to DYNO it before you put it in the car?
Click to expand...

Shit, I can't even get her to help me anymore lol. She's a busy girl, works two jobs and goes to school full time! Can't fault her for that.

hangemhigh said:
Looks like it's all business to me....Very cool!
Click to expand...

Thanks Uncle Jim!

AutoRoc said:
That's a pumpgas mill, especially with a "sporty" cam like that. It's gonna fly and looks great!
Click to expand...

Thanks bud. Pump gas was my goal, I want to enjoy this thing! Won't be the fastest car out there, but should be fun.

derbydad276 said:
race fuel or E85 ?
Click to expand...

Pump gas! The only way to have a street car lol.
 
Took the night off work last night and measured up for motor plates, cut and drilled them, then spent a while giving them a mirror polish. Then I got the motor in today. Waiting on converter and then the trans can go in. Then time for wiring and thunder in the pipes!

Sorry for the crappy cell phone pictures. DSLR is dead at the moment.

10982001_10204323409191955_3576274678576338436_n.jpg


11101153_10204323374271082_5918312316971773798_n.jpg


11265203_10204323373551064_2101222330685381831_n.jpg
 
You must log in or register to reply here.
Back
Top