project notch

chrisjr77

chrisjr77

Forum Member
the car is a 1985 but has newer clip and quater glass!
car is pretty clean couple of small surface spots
buy no biggie. pulled the dash and heater box
the other night and put the manual brake set up i got
from dave on tonight! i will get more pics tomorrow:thumbsup:
 

Attachments

  • notch 006.jpg
    notch 006.jpg
    93.9 KB · Views: 345
  • notch 003.jpg
    notch 003.jpg
    92.4 KB · Views: 345
  • notch 004.jpg
    notch 004.jpg
    97.6 KB · Views: 345
  • notch 005.jpg
    notch 005.jpg
    91 KB · Views: 345
Last edited:
more pics

here is some more pics of the engine bay
i dont know what exactly i am going to do
with the pass side.. it was in an accident
before i got it.... maybe just come a long
and my tree?? any suggestions? thanks
 

Attachments

  • notch 001.jpg
    notch 001.jpg
    95.4 KB · Views: 304
  • notch 002.jpg
    notch 002.jpg
    96.2 KB · Views: 304
  • notch 003.jpg
    notch 003.jpg
    92.6 KB · Views: 300
  • notch 004.jpg
    notch 004.jpg
    92.6 KB · Views: 303
  • notch 005.jpg
    notch 005.jpg
    92.5 KB · Views: 304
front end and sunroof

weel i figured out what i am doing with pass side and sunroof. a guy i traded some tweed seats for has a coupe with rotted floors that he is scraping, so he is going to cut off the front end behind the strut towers and he is goin to cut the roof off as well!!! i will post pics of before and after!!!
 
out with the old

i drilled and cut out the spot welds holding the core support and the messed up sheet metal on the pass side. had to stop there cuz i cut my index finger on my left hand to the WHITE MEAT....lol
 

Attachments

  • notch frame rail 002.jpg
    notch frame rail 002.jpg
    96.5 KB · Views: 151
  • notch frame rail 001.jpg
    notch frame rail 001.jpg
    95 KB · Views: 150
i cut my finger with my metabo cut off wheel!!! it cauterized it instantly no blood....lol i just super glued it and taped it up with a popcicle stick!!!
 
well i havent been out in the garage in a couple of weeks to do anything
to the car. i got called back to work and been workin a ton of doubles. shit now i will have a lot of extra money to play with now.........:thumbsup:
 
chrisjr77 said:
i cut my finger with my metabo cut off wheel!!! it cauterized it instantly no blood....lol i just super glued it and taped it up with a popcicle stick!!!
Click to expand...

Put a nice "groove" in my finger last week. Was using an angle grinder with a 24 grit flapwheel. If you ever want to see what the inside of your finger looks like, this is the perfect tool for the job! Came into the house with a bloody rag wrapped around my finger. Went into the bathroom and got a band- aid. Had the wife put it on nice and tight. Wrapped it with hockey tape. Back to the garage to finish what I was working on. Stitches? I don't need no stinking stitches!!!!!!
 
I darn near cut my left index finger off but the bone stopped it. I just put a few bandaids on it and kept on working...

keep up the good work on the car.
even though you will have the money for the car you just wont have the time to work on it. but dont worry you have all winter to finish it up :D
 
You must log in or register to reply here.
Back
Top