Need Stang Steering Knuckle ASAP

cjmatt

Club Member
Well, I took the front wheels off of my notch today for the first time and needless to say, I really shouldnt be driving it as is. I believe theyre SN95 knuckles. Can anyone confirm?

Anyone got a set they wanna sell ASAP or know where I can get a set on short notice?

Need passenger side, but will take both sides or else a forx 5 lug conversion with fox knuckles if need be


20244a355dc970b92.jpg


20244a355dc95a42e.jpg
 
those are 94 up knuckles and i would say not safe to drive with that bent steering arm. the setup i'm selling will bolt right in place of that.
 
94-95 spindles have a "bent" arm where the tie rods hook up.

96-04 spindles have a straight arm where the tie rod hooks up.

Those are 99-04 PBR calipers (dual piston) 94-95 spindles need to be grinded a tad to get those to work. 96-04's do not need to be grinded.

Coil overs...I know nothing about, I use stock parts.


BTW...I have a right spindle for that car. Let me know which particular year as I descrbied above. ^
 
Back
Top