My Z06 on the dyno

airtonics

Forum Member
I was in ohio for a car show this weekend and put my cavy and vette on the dyno.

The Z06 put down 498whp & 480tq. Not too shabby for a day that was 90+ degrees and 90% humidity :)

[ame="http://www.youtube.com/watch?v=u1abKpvTAhg"]YouTube - Vette dyno1[/ame]

[ame="http://www.youtube.com/watch?v=rxXKbiFwnnk"]YouTube - Vette dyno2[/ame]

To give a comparison my cavalier put down 286hp/255tq and it runs 12.8@112 mph in the quarter :)

After I get this shifting issue worked out I'm anxious to get the Z06 at the track!!!!
 
I go from a cavalier to a z06 and ppl want to know about cavalier? haha

The cavalier has quite a bit done. Essentially it's a 2.2 DOHC Ecotec motor with an intercooled M62 supercharger and built motor (head, cams, forged) etc. I've pretty much maxed out the supercharger any more power I'd need nitrous switch over to turbo. However due to the purchase of the vette the cavy is being parted out.

I made a post about the cavy when i finished the motor and had a few vids http://motownmuscle.com/forums/showthread.php?t=84687

Only difference now is it has a larger TB setup I fabricated and an Ice box for the intercooler

Photo0116.jpg
 
Vengence Racing forged 402 stroker, 11.6 compression, Trickflow 243 heads, vengence racing vindicator camshaft, fast 90/90, kooks 1 3/4" headers, x pipe & catback is the most of it.

Maybe next year and after the shifting issue is resolved I'll put some nitrous on it though. We'll see, car doesn't have a cage and I'd prefer not to put one in it.
 
Both awesome cars, I agree the Z sounds AWESOME!!!
Good luck with the cars, and let us know when you run them at the track!
 
Back
Top