My 88 coupe project pic's

Worked on the car today. Got the drivers side floor cut out. I just need to remove the edge piece along the inner rocker. After that i'll start fabbing up the toe board piece that comes down and meets the floorboard. Basically it's the same repair as i did on the passenger side. After that is installed i'll start trimming the new pan for installation. Pic's will be posted soon.
 
black88coupe said:
Worked on the car today. Got the drivers side floor cut out. I just need to remove the edge piece along the inner rocker. After that i'll start fabbing up the toe board piece that comes down and meets the floorboard. Basically it's the same repair as i did on the passenger side. After that is installed i'll start trimming the new pan for installation. Pic's will be posted soon.
Click to expand...

I am actually getting stuff done. Here's some proof!

http://s274.photobucket.com/albums/jj278/black88coupe/?action=view&current=driverssidefloor-1.jpg

http://s274.photobucket.com/albums/jj278/black88coupe/?action=view&current=Passsidefloor.jpg
 
Fabbed and installed the drivers side toe board. I also installed and completely welded the topside of the dr. side floor pan. All i have left to do is some misc. welding on the bottom side and the floorpans are 100% done. Next on the agenda- subframe connectors. Those could be installed as soon as the end of next week.
 
I got the cowl smoothed out. I just need to do the firewall where the a/c stuff used to poke through. Then I'll move on to the strut towers and the front inner fender aprons. Hopefully, I'll finish the firewall tonight.
 
Last edited:
You must log in or register to reply here.
Back
Top