Mint Modified 86 GT For Sale

Dooger

Dooger

Forum Member
(SOLD).............


Well I think the time has come.......putting my 86 GT on the market. Wife and I are shopping for houses and car hasn't been used much at all so moving on to a new chapter. This is not a fire sale, I love this car so serious buyers only.

Bought this car from GA, rust free beautiful car. Last year I started adding more mods, finished up around November 2014 so with Michigan winter around the corner car was put away for storage over winter. Was going to get dyno tuned and enjoy this summer but now house shopping for my growing family is a priority over toys/cars. Please let me know if you have any questions, I can give you the full run down of the car and my ownership. Previous owner owned it for 15 years, I've had it about 2 years adding maybe 200 miles before extra mods. Never raced, used as street car and cruise nights.

Thanks for looking, Doug 248-420-57 three five or [email protected]



1986 Ford Mustang GT $10,200












Engine: (Car runs and idles perfect but should get dyno'd from new added parts)
-Stock roller block balanced rotating assembly 306, compression 9.5-1
-Paxton Novi 1000 Supercharger w/UPR power pipe. 2 belt kit, with approximately 6k miles. No shaft play, nice condition. Stock 3.33 pulley with 8" renegade lower pulley (approximately 12psi depending on supporting parts).
-TRW Forged pistons/rings
-Stock rods
-Stock crank
-APR hardware on connecting rods, main caps and head bolts
-Anderson N41 Cam - 222/232 .544/.544 w/1.7 rocker 110 106
-Crane Blue 1.7 pedestal rockers
-Edelbrock Performer RPM heads O-ringed (head specs are 2.02/1.60 valves)
-Edelbrock Performer RPM II intake
-Accufab 70mm throttle body, with polished EGR delete
-3 core aluminum radiator
-Mishimoto performance dual radiator fans
-Dakota Digital PAC 2750 programmable dual fan controller
- Complete MSD Digital 6AL ignition
- Flowtech Ceramic Coated 1 5/8” primary/3” collector Long Tube Headers w/custom SpinTech 3” X pipe and 3” Sportsman Mufflers w/dumps
-Pro-M mass air meter
-Anderson Ford Motorsports big mouth 3”x 10” air filter
-Lucas 42lb injectors
-DeatschWerks 300 Series 340LPH/90GPH in-tank fuel pump
-Adjustable Fuel Regulator
-Hi flow water pump
-6G SN94 one wire alternator upgrade
-March alternator bracket with adjustment rod

Drivetrain:
-AODE with upgraded late model 4R70W gear set
-Alto Red clutches
-Kolene steel plates
-Kevlar band
-Upgraded servo
-One way diode upgrade
-Performance modified valve body
-Deep cast TCI aluminum pan
-B&M Trans Cooler
-2800 stall converter with lockup
-Baumannator/US Shift fully adjustable transmission controller
-Custom shaft from CCI Driveline
-Stifflers transmission cross member and drive shaft loop
-Strange 31 spline
-Auburn pro trak lok
-FMS 3.73 gears

Suspension:
-Team-Z front end kit w/K-member, A-arms, adjustable coil overs and camber caster plates
-Rear aftermarket tubular type upper and lower control arms
-Flaming River low profile steering shaft
-SN95 Front Disk Brakes
-Through floor sub-frame connectors
-Billet Specialties RT series wheels 15X10 rears with Mickey Thomson 275/50/15 drag radials, 15X4 fronts

MIsc:
-Car weighs 3240lbs w/driver
-New paint, 5 years ago, Dupont Oxford White
-Complete custom Florida 5.0 gauge cluster with Auto Meter gauges.
-Battery hatch relocation kit with Optima red top battery

Extras for sale that I was going to build/add for next phase of the car With Prices

(Located at my engine builder’s shop in Braselton, GA) Buyer pays shipping and fee's.

-Brand New in box Mac 1 ¾” Ceramic Long Tubes $450 (Can send pics)
-Brand New in Box AFR Polished Valve Covers $150
-Brand New in box/crate Boss "Big Bore" Block $1400 Serial # 11K2962 M-6010-B302BB (Can send Pics.)


Walk Around Video.
https://www.dropbox.com/s/qadcw2oefma7byz/86 GT start up.MTS?oref=e&n=243739453
 
Last edited:
No local interest on the car?......is it priced to high or are 4 eyes not the ticket these days? Any constructive comments or thoughts are appreciated to help me sell with out giving it away. Lot's of money and time into this car, have a folder full of receipts from what parts I've bought and put into it.
 
I think it's worth it to the right person. It's a gorgeous car and it's obvious there's a lot of $ into it.

One thing to take into consideration is not a lot of people have that money in their bank accounts and may need to get a loan which is harder to get on something that old unless you have A-1 credit and a good credit union that'll work with you.
 
I'm guessing the biggest reason is the price. I'm not saying your price is out of line, I personally think when you start having to price a fox over 10K it really limits the people who can purchase the car. You're cutting out a lot of people who don't have 10K+ saved up that they can blow on a toy. It's tough to get financed for a car that is nearly 30 years old without the interest rate being silly. What you need is some old guy(like me who is 40) that just has to have a car from his youth.(my first car was an 85 GT) This will take some patience on your part but we're out there. :)

I really dig the car, I love the 85/86 cars. The only issue for me is the sunroof, I'll never own a fox bodied mustang with the sunroof. :(
 
Last edited:
BigWheelinBubba said:
I think it's worth it to the right person. It's a gorgeous car and it's obvious there's a lot of $ into it.

One thing to take into consideration is not a lot of people have that money in their bank accounts and may need to get a loan which is harder to get on something that old unless you have A-1 credit and a good credit union that'll work with you.
Click to expand...

X2 you beat me to it! :lol: Started typing before your post but the kids drug me away from the computer for a bit.
 
BigWheelinBubba said:
I think it's worth it to the right person. It's a gorgeous car and it's obvious there's a lot of $ into it.

One thing to take into consideration is not a lot of people have that money in their bank accounts and may need to get a loan which is harder to get on something that old unless you have A-1 credit and a good credit union that'll work with you.
Click to expand...


Thanks for the feedback....I would say your dead on....LOL. I didn't have the money either and got a loan from my bank but then again I'm a member at a credit union and had a long history so they were cool with lending.
 
nitrousrick said:
I'm guessing the biggest reason is the price. I'm not saying your price is out of line, I personally think when you starting having to price a fox over 10K it really limits the people who can purchase the car. You're cutting out a lot of people who don't have 10K+ saved up that they can blow on a toy. It's tough to get financed for a car that is nearly 30 years old without the interest rate being silly. What you need is some old guy(like me who is 40) that just has to have a car from his youth.(my first car was an 85 GT) This will take some patience on your part but we're out there. :)

I really dig the car, I love the 85/86 cars. The only issue for me is the sunroof, I'll never own a fox bodied mustang with the sunroof. :(
Click to expand...

x2.....thanks for the feedback. I'm open to a nice offer that's close but definitely not going to give it away as that's not the situation I'm in and will just enjoy it. Funny what you state because that's exactly how I sold a boat I had a few years back. Retired ex-cop from Texas flew up to buy it and drove it home, wanted a toy for retirement and had the money. :)
 
BigWheelinBubba said:
Thats not an oem sunroof, Rick.. shouldn't be as susceptible to rust as bad as the Ford ones if it was installed right.
Click to expand...

I'm not sure if OEM or not but there isn't 1 spec of rust on this car and the headliner is new with custom tuck in corners. No issues with weather stripping or any seals. Hey at least it's not a T-Top......LOL
 
Dooger said:
I'm not sure if OEM or not but there isn't 1 spec of rust on this car and the headliner is new with custom tuck in corners. No issues with weather stripping or any seals. Hey at least it's not a T-Top......LOL
Click to expand...

oem sunroof cars has vynal sunvisors IIRC
 
Local guy coming by today to check out the car. Seems serious and cash in hand so might be gone soon. Will update if car sells. Thanks Motown
 
Local person looked again today, hoping can work something out. Will update if sells or not, have others inquiring about looking so think she will have a new home soon. Thanks Motown.
 
nitrousrick said:
Hopefully you sell it before I decide to change my mind about owning a fox with a sunroof!
Click to expand...

I agree Rick, I recently made an offer on an eBay car like this. This is a great looking ride, with nice upgrades. Please sell it soon so I can stop dreaming of buying it and cutting the roof off to not have a sunroof!!!!

:banghead:
 
91trunk said:
I agree Rick, I recently made an offer on an eBay car like this. This is a great looking ride, with nice upgrades. Please sell it soon so I can stop dreaming of buying it and cutting the roof off to not have a sunroof!!!!

:banghead:
Click to expand...

Just what you need....another car you wouldn't drive.....;)
 
91trunk said:
I agree Rick, I recently made an offer on an eBay car like this. This is a great looking ride, with nice upgrades. Please sell it soon so I can stop dreaming of buying it and cutting the roof off to not have a sunroof!!!!

:banghead:
Click to expand...

I was thinking I would just replace the metal that was cut out when the sunroof was put in. It can't be that hard and should be able to blend the roof pretty easy. Gotta stop thinking about this! :lol:
 
You must log in or register to reply here.
Back
Top