LOTS OF MUSTANG STUFF

outlaw50

outlaw50

Club Sponsor
WILSONS 42 LB FLOW MATCHED INJECTORS
225.00 OBO

PRO-M 80MM MASS AIR CAL FOR 42 LB WITH BOLT ON K&N CONE
200.00 OBO

BBK 1 3/4 LONG TUBES, H-PIPE AND FLOWMASTERS DUMPED
THE COMPLETE SET UP HAS LESS THAN 200 MILES ON IT LIKE NEW!
375.00 OBO

MAC 1 3/4 LONG TUBES AND H-PIPE, IN OK SHAPE A LITTLE RUSTY
150.00 OBO

C&L MASS AIR CAL FOR 24 LBS
65.00 OBO

STOCK EFI RAILS WITH ADJ REGULATOR
30.00 OBO

-6 NOS FILTER
25.00 OBO

-8 NOS Y
15.00

EBELBROCK RPM SBF HEADS. THESE HEADS CAME OFF MY BLACK CAR, FULLY RACE PORTED 2.08/1.60 305@600 / 234@600
1000.00 OBO

408W SHORT BLOCK 4340CRANK, H-BEAM RODS, PROBE PISTIONS CUT FOR TW OR INLINE HEAD, 280Z BAL,NEW!
2800.00 OBO

347CI SHORT BLOCK CAST CRANK, 4340 I-BEAM RODS, PROBE PISTIONS CUT FOR TW OR INLINE HEAD, 28 OZ BAL, NEW !!!
1980.00 OBO

For sale with dyno time only,

445 cubic inch sbf race motor. made 915 hp @ 9100 rpm and 688 tq. @ 7100 rpm. Motor was dyno @ jomar back in may N/A. No power adder!!

-Dart sportsman block bored to 4.155
-Victor heads & Super Victor with Dominator spacer, ported by tea .
-2.18 int. 1.60 exh. flowed 400 / 290 on conservative bench.
-Titaninum locks & retainers, Comp 947 springs.
-Kooks headers 2 inch stepped to 2 1/8 with 4 inch collector.
-Cam motion solid roller
-Crane Pro series off set lifters
-Jesel 1.8 rockers int. & exh.
-Cantons best dry sump oiling system (complete)
-external stage 3 adjustible oil pump
-Custom 15 degree JE pistons (flat top 16 to 1)
-scat billet crank 4.100 stroke, grp rods 6.250 with up graded wrist pins.
-Comp one piece pushrods
-sheet metal valve covers with adjustible vacuum valve.
-Moroso vacuum pump.
-CSR electric water pump
-billet timing chain
-JW 0 balance flexplate

-Complete intake to pan, asking $17,000

1-586-634-0970 after 6pm
 
what deck height is the exhaust for?

what deck height is the exhaust for? 8.2 9.2 or 9.5. oh and head inline like a vic jr.? Thanks Bob
 
outlaw50 said:
WILSONS 42 LB FLOW MATCHED INJECTORS
225.00 OBO SOLD!!!!

PRO-M 80MM MASS AIR CAL FOR 42 LB WITH BOLT ON K&N CONE
200.00 OBO

BBK 1 3/4 LONG TUBES, H-PIPE AND FLOWMASTERS DUMPED
THE COMPLETE SET UP HAS LESS THAN 200 MILES ON IT LIKE NEW!
350.00 OBO

MAC 1 3/4 LONG TUBES AND H-PIPE, IN OK SHAPE A LITTLE RUSTY
120.00 OBO

C&L MASS AIR CAL FOR 24 LBS
45.00 OBO

STOCK EFI RAILS WITH ADJ REGULATOR
20.00 OBO

-6 NOS FILTER
15.00 OBO

-8 NOS Y
5.00

EBELBROCK RPM SBF HEADS. THESE HEADS CAME OFF MY BLACK CAR, FULLY RACE PORTED 2.08/1.60 305@600 / 234@600
1000.00 OBO

408W SHORT BLOCK 4340CRANK, H-BEAM RODS, PROBE PISTIONS CUT FOR TW OR INLINE HEAD, 280Z BAL,NEW!
2400.00 OBO

347CI SHORT BLOCK CAST CRANK, 4340 I-BEAM RODS, PROBE PISTIONS CUT FOR TW OR INLINE HEAD, 28 OZ BAL, NEW !!!
1880.00 OBO

For sale with dyno time only,

445 cubic inch sbf race motor. made 915 hp @ 9100 rpm and 688 tq. @ 7100 rpm. Motor was dyno @ jomar back in may N/A. No power adder!!

-Dart sportsman block bored to 4.155
-Victor heads & Super Victor with Dominator spacer, ported by tea .
-2.18 int. 1.60 exh. flowed 400 / 290 on conservative bench.
-Titaninum locks & retainers, Comp 947 springs.
-Kooks headers 2 inch stepped to 2 1/8 with 4 inch collector.
-Cam motion solid roller
-Crane Pro series off set lifters
-Jesel 1.8 rockers int. & exh.
-Cantons best dry sump oiling system (complete)
-external stage 3 adjustible oil pump
-Custom 15 degree JE pistons (flat top 16 to 1)
-scat billet crank 4.100 stroke, grp rods 6.250 with up graded wrist pins.
-Comp one piece pushrods
-sheet metal valve covers with adjustible vacuum valve.
-Moroso vacuum pump.
-CSR electric water pump
-billet timing chain
-JW 0 balance flexplate

-Complete intake to pan, asking $16,000

1-586-634-0970 after 6pm
Click to expand...
\

PRICE CHANGES EVER THING MUST GO !!
 
You must log in or register to reply here.
Back
Top