Ford 4.6 4v mod motor parts

MarkVIII93

Forum Member
I was planning on building a motor but I've decided buying an assembled long block would be much more economical.
I disassembled my original 97 cobra motor due to a rod knock. I have one bad crank. One brand new Kellogg 8 bolt crank. Teksid block with 150k or so and stock cylinder heads with cams. Timing cover. I will post some pics later. If you need something, pm me and I will give you price or let you know if I have it.

Complete b heads: SOLD

Complete c heads with ac casting: 250$

Teksid block: SOLD

96-98 timing cover: 50$

Spec clutch: SOLD.

Kellogg/ford forged 8 bolt stock stroke crank. $750 firm no shipping. (Retails for. 1599 through mmr)

If you need something else that isn't listed feel free to pm. Aside from the crank, all prices are negotiable.

Sent from my iPhone using Tapatalk
 
Last edited:
ImageUploadedByTapatalk1398809386.255493.jpg
This is what all the cylinder walls look like. Block is sold.


Sent from my iPhone using Tapatalk
 
Last edited:
ImageUploadedByTapatalk1398810269.520769.jpgImageUploadedByTapatalk1398810276.638183.jpgImageUploadedByTapatalk1398810283.653645.jpgImageUploadedByTapatalk1398810291.225530.jpg
Stage 1 10 spline and 10.5 flywheel. $50 for everything. Also have a nodular iron 11" flywheel. 50$.


Sent from my iPhone using Tapatalk
 
Bump. It is a ford/Kellogg crank. Looking to get $800. $200 for the block. $100 for main bearings. Also have pair of bheads off the 97 cobra with cams and all springs and valves. $150 for those as well as some 03/04 cobra head "4 thread" with AC casting/non updated. One corner of one head has been cracked. $250 for those. Very low miles it looks like.


Sent from my iPhone using Tapatalk
 
Thread updated. I really wanted this crank gone! $700!!!!

Sent from my iPhone using Tapatalk
 
Last edited:
Need to move these heads 100 for complete b heads. 100 for the 03 cobra head complete just needs one section welded.


Sent from my iPhone using Tapatalk
 
Back
Top