Built AOD, Lentech Equipped, 10" Converter, B&M hammer shifter

SuperStang90

Club Member
I have a Built AOD, rated to 850hp. Alto red clutches, 1 piece input shaft, Auto/Manual valvebody, Electric OD on a switch. Trans has been 8.90s on a blower/nitrous car. Converter is a 10" unit 4200 stall build by midwest converters, behind a turbo 302 making about 500hp it flashed to about 3200. Trans is pretty fresh with only about 1000 street miles and 5 passes. I was told this is a Lentech street terminator trans but don't have any documentation. This was in Kips old red vert. Shifter is a practically brand new BM hammer that fits the factory fox console.



Sold
 
Last edited:
Back
Top