Det_Riot
Forum Member
Picked this up from a buddy with aspirations of rebuilding it and putting it in my car but never got the motivation to understand automatic transmissions. My loss your gain. Trans was mated to a SBF. The transmission was disassembled due it not making the 2-3 shift, valve body is currently removed but all the parts are there. Main Case of the transmission was never opened. Should just need a new valve body and be good to go.
pics are in the CL ad: http://detroit.craigslist.org/wyn/pts/4150062703.html
Looking for $1200 OBO or trade for 94-98 or SBF Mustang Parts, slicks & skinnies, etc, open to offers!
Specs from Lentech's site:
Enthusiast's Choice Part# 7000-AOD-STT
Now rated to 800 h.p. w/standard 1 pc shaft!
Overview: Features the 1-2-3/4 shift pattern originated by Lentech, compression engine braking in manual second, electric overdrive delete (or lockout) and billet input shaft. This transmission is pressure modulated, meaning the throttle pressure cable controls the mainline pressure with the opening and closing of the throttle. The minimum operating pressure is elevated considerably to reduce setup liability and prolong longevity. These units are fully automatic with manual shift capability, and their shift "feel" is custom tailored to your application based on information taken about your combination at time of order. With Street Terminator units, overdrive should remain locked out until at freeway cruising speed.
Specifications:
.Quality selected core, completely stripped, all major components washed and inspected for excessive wear
.Pump modified for better lube and cooler flow
.Clutch cylinders modified for extra clutches
.26 modifications in strategic areas for efficient clutch operation and life
.6 "high energy" 3-4 clutches
.3 intermediate clutches
.5 forward clutches
.3 or 4 reverse clutches
.New redlined O/D band
.All new seals, gaskets, and filter
.New bushings and thrustwasher (where needed)
.New intermediate one-way clutch and spiral lock ring
.New low one-way clutch
.Lentech 1-2-3/4 Valve Body with electric O/D delete
.Hardened 1-piece input shaft
.New oil pan and bolts
.Re-assembled with all critical clearances adjusted for high performance/racing use
.Cast gray finish
.All complete units are dyno tested to insure a quality product
.Lifetime LTD Warranty
pics are in the CL ad: http://detroit.craigslist.org/wyn/pts/4150062703.html
Looking for $1200 OBO or trade for 94-98 or SBF Mustang Parts, slicks & skinnies, etc, open to offers!
Specs from Lentech's site:
Enthusiast's Choice Part# 7000-AOD-STT
Now rated to 800 h.p. w/standard 1 pc shaft!
Overview: Features the 1-2-3/4 shift pattern originated by Lentech, compression engine braking in manual second, electric overdrive delete (or lockout) and billet input shaft. This transmission is pressure modulated, meaning the throttle pressure cable controls the mainline pressure with the opening and closing of the throttle. The minimum operating pressure is elevated considerably to reduce setup liability and prolong longevity. These units are fully automatic with manual shift capability, and their shift "feel" is custom tailored to your application based on information taken about your combination at time of order. With Street Terminator units, overdrive should remain locked out until at freeway cruising speed.
Specifications:
.Quality selected core, completely stripped, all major components washed and inspected for excessive wear
.Pump modified for better lube and cooler flow
.Clutch cylinders modified for extra clutches
.26 modifications in strategic areas for efficient clutch operation and life
.6 "high energy" 3-4 clutches
.3 intermediate clutches
.5 forward clutches
.3 or 4 reverse clutches
.New redlined O/D band
.All new seals, gaskets, and filter
.New bushings and thrustwasher (where needed)
.New intermediate one-way clutch and spiral lock ring
.New low one-way clutch
.Lentech 1-2-3/4 Valve Body with electric O/D delete
.Hardened 1-piece input shaft
.New oil pan and bolts
.Re-assembled with all critical clearances adjusted for high performance/racing use
.Cast gray finish
.All complete units are dyno tested to insure a quality product
.Lifetime LTD Warranty
