4eye notch

laynplztic

Club Member
just picked it up last night in the spure of the moment...

4cyl auto .. has motor problems hasnt ran in 3 years blah blah blah

soild as a rock! minus the driver door its rusty on the bottom

plans... umm try to get it runni nthis weekend...if i suceed throw some ponys on it an ride.. maybe sell maybe 302 who knows... i never keep anything to long lol


pics below of it before i scrub it down

zogx88.jpg


148gqv6.jpg

16jek54.jpg
 
bout time too bad you didnt hang onto any of those 302s u had! let me know whats wrong with it big homie put a v8 and race my omni...hahah
 
lol thanx chubbs... i went and picked up those ponys i was tellin u about today should look sweet on them!

also picked up a new starter today for it so ima try to turn it over here in a little bit!
 
i got it fired today.... only can get it runnin on starting fluid.. so ima check the fuel system... problem is the starter stays hung up... can i use shims on this starter??
 
so0o0o0o figured out the griding problem...

trans wasnt bolted to the motor?? but now that it is i cant turn it over at the crank with a wrench....any ideas?!?
 
so0o0o0o figured out the griding problem...

trans wasnt bolted to the motor?? but now that it is i cant turn it over at the crank with a wrench....any ideas?!?

get a bigger wrench/put a pipe on the end of it:thinkerg::cheers:... is it a stick or manual, try putting it in neutral... the trans is jacked up...
 
Last edited:
get a bigger wrench/put a pipe on the end of it:thinkerg::cheers:... is it a stick or manual, try putting it in neutral... the trans is jacked up...

wellllll a stick and a manual are the same steve!! but its an auto ..tried the neutral still nothing... losend up the bolts 2 the trans it in spins again... sooooo trans is locked id guess?
 
wellllll a stick and a manual are the same steve!! but its an auto ..tried the neutral still nothing... losend up the bolts 2 the trans it in spins again... sooooo trans is locked id guess?

damn it, you got me... maybe i should proof read huh:rocketwho... thats really weird... maybe the trans and motor isnt aligning properly and is cocked a little... if the input shaft is still inserted into the converter thats the only thing i can think of because if the trans was locked up it wouldnt spin at all then even if the bolts were loose
 
got the ponys today... pic below...
qx5p9j.jpg


also cleand out the trunk and theres 0 rust in there
30niveo.jpg




AND for steve i bought another car today lol

x0px01.jpg
 
well im waitin to hear back.... i got parts from a guy off a wrecked gt a few months back an i offerd him a lowball on the rest of the car sooo will see how that goes... thing is it comes with ponys..black interior.. sooo ill be sellin the ponys i got today prolly plus the black interior..which should fund some of the swap money

if that dont happen ill find a trans

or sell the dam notch :(
 
Back
Top