325/50/15's

[aimmotorsports]

used up is ok. im looking for something to check fit in my notch. or if a good set is around... so much the better...

 

[THOR84GT]

they wont unless you are mini tubbed or at the very least have coil overs and cut out the stock spring perch area and roll the lips

 

[dpmcghee]

or at the very least have coil overs and cut out the stock spring perch area and roll the lips

Actually, I've seen a few fit them with stock spring location... They beat the fender wells in a ridiculous amount (might as well mini tub it) and roll the lips. Not how I would do it, but it can be done. It doesn't seem to look right to me either. The wheel just tends to stick out too far.

 

[THOR84GT]

it will either rub badly or stick out of the wheel well. depending on how much your car squats the tire will hit the quaterpanel, and even trying to tuck them in you have to completely buckle in the inner whell tub area behind the spring

 

[aimmotorsports]

its getting a mini tub and a slightly narrowed rear end...

 

[THOR84GT]

how much narrowed? if you don't narrow it just go with a 15x10 w/7.5" backspace

 

[bad466]

I have a set you can have.

 

[aimmotorsports]

I have a set you can have.

pm sent

 

[bad466]

pm sent

pm replied:hugegrin: