'00 GT Project

full time slip


60- 1.9981
330- 4.8713
660- 7.1261
mph-110.05
1000-9.0461
mph-127.50
1/4- 10.6639
mph-139.93

Need to get a cage, subframe connectors done soon and work on the brakes to hold the car better


Then I will work on turning the boost above 9psi!
 
Last edited:
Brake won't be in until a winter project

Gonna try for NO ET Sat.
then put a cage/subframe connectors in it shortly
 
Thanks for the compliments

Hoping to make Oct NoET to get a few passes and better what I have done with it so far



The last pass I made I got the car to 60' 1.89 (.10 better)
Started hazing the tires 100' out I ended up pedaling it before the 1/8 to straighten it out

went 7.35 to the 1/8 and went 10.80 @ 141 1/4

Only change I have made is a turbo blanket since then
car seems to come in a little quicker but I still need a brake to launch it correctly

I'll be happy if I can squeek a 10.40/50 out of it this year

Then I'll put a cage/subframes in it along with transbrake
 
I thought you had to have a cage at Milan to run under 11s



Thanks for the compliments

Hoping to make Oct NoET to get a few passes and better what I have done with it so far



The last pass I made I got the car to 60' 1.89 (.10 better)
Started hazing the tires 100' out I ended up pedaling it before the 1/8 to straighten it out

went 7.35 to the 1/8 and went 10.80 @ 141 1/4

Only change I have made is a turbo blanket since then
car seems to come in a little quicker but I still need a brake to launch it correctly

I'll be happy if I can squeek a 10.40/50 out of it this year

Then I'll put a cage/subframes in it along with transbrake
 
First time out was a Friday test. Once it went in the 10's they scolded me =)
No ET I haven't had any issues (no times showing) and for Passtime was a 1 run thing so they didn't question it
 
Got the new shortblock back today

Forged 370ci
currently getting the cage work done.

Hope to have it out sometime in April
 
Finally got the car on the road a week ago

Changes made were

add Air to Air IC
new t400 w/brake
370ci shortblock forged pistons, eagle rods
team z coilover kit (have yet to install coilovers on rear)
10pt cage
thru floor subframes
kirkeys
took off 325 radials and put on 275/60/15s

Have to do some tuning on it and hopefully get it to the track soon
IMAG0259.jpg

IMAG0260.jpg

IMAG0236.jpg

IMAG0247.jpg
 
Nice! you should sell me this car! I love it!

Who did the cage?
It feels nice to finally have a project about done... If I sold it I would have to start something else and pull my hair out all over again!! lol

It is a competition engineering 10pt kit
I put it in and tacked it and had my brother weld it because I absolutely suck at welding!
 
Back
Top