step dads selling his motor , he bought it to put it in something but never got around to it , its a zz4 350 crate motor , 355hp , aluminum heads , motor is oil pan to intake ( no accesories , pretty sure theres a distributor and maybe a water pump and a few other misc. items , pretty sure the carb is a holley 700 ) , has less than 500 miles on it , he is wanting 1500bucks firm for it , ill have pictures up in a few , heres the specs i found for in on the web
ZZ4 350 TURN-KEY TECH SPECS:
Part Number:
12499712
Engine type:
Chevy small-block V-8
Displacement (cu in):
350
Bore x stroke (in)cf6 :
4.00 x 3.48
Block (P/N 10105123):
Cast iron with 4-bolt main caps
Crankshaft (P/N 12556307):
Forged steel
Connecting rods (P/N 10108688):
Powdered metal steel
Pistons (P/N 10159436):
High-silicon aluminum with offset pins
Camshaft type (P/N 10185071):
Steel hydraulic roller
Camshaft lift (in):
.474 intake / .510 exhaust
Camshaft duration (@.050 in):
208'c1 intake / 221'c1 exhaust
Cylinder heads (P/N 12556463):
Aluminum; 58cc chambers
Valve size (in):
1.94 intake / 1.50 exhaust
Compression ratio:
10:1
Rocker arms (P/N 10089648):
Stamped steel
Rocker arm ratio:
1.5:1
Recommended fuel:
92 octane
Ignition timing:
10'c1 BTDC @ 800 rpm, cf0 32'c1 total @ 4000 rpm with vacuum advance disconnected
Maximum rpm:
5800...............
any intrest send me a PM , he is usually available weekdays after 6 or anytime weekends
ZZ4 350 TURN-KEY TECH SPECS:
Part Number:
12499712
Engine type:
Chevy small-block V-8
Displacement (cu in):
350
Bore x stroke (in)cf6 :
4.00 x 3.48
Block (P/N 10105123):
Cast iron with 4-bolt main caps
Crankshaft (P/N 12556307):
Forged steel
Connecting rods (P/N 10108688):
Powdered metal steel
Pistons (P/N 10159436):
High-silicon aluminum with offset pins
Camshaft type (P/N 10185071):
Steel hydraulic roller
Camshaft lift (in):
.474 intake / .510 exhaust
Camshaft duration (@.050 in):
208'c1 intake / 221'c1 exhaust
Cylinder heads (P/N 12556463):
Aluminum; 58cc chambers
Valve size (in):
1.94 intake / 1.50 exhaust
Compression ratio:
10:1
Rocker arms (P/N 10089648):
Stamped steel
Rocker arm ratio:
1.5:1
Recommended fuel:
92 octane
Ignition timing:
10'c1 BTDC @ 800 rpm, cf0 32'c1 total @ 4000 rpm with vacuum advance disconnected
Maximum rpm:
5800...............
any intrest send me a PM , he is usually available weekdays after 6 or anytime weekends
Last edited:
