WTB: SN-95 spindles, Saleen ground effects, polished LX tailpipes

mystang

mystang

Club Member
Getting to have my 92 Mustang redone finally!!! Here are a few parts I'm looking for, thanks.
SN-95 spindles
Saleen ground effects 92 front piece
polished 2.5" thru 3" polished tailpipes
 
Do you want 94/95 spindles or 96+ ?
jakefb has a pair of spindles from his '02 for sale along with the brakes and such.
 
Whatever I need to do a 5 lug conversion. Don't want the Lincoln rotors, because I do not want to be limited on what rims I can run with a center cap.
 
If you are using the stock K-member, I would recommend '94-'95 pieces. The '96+ spindles will push the wheel out another 8mm (which may not matter depending on the wheels you want to run) and the tie rod mount is approximately 1" lower and will further increase bump steer. I believe that a K-member with non-factory geometry benifits from the '96+ pieces.
 
stick with 94/95 stuff.

Lincoln rotors once modified work on ALL wheels. I ran Anny wheels on mine.
 
i used zinc 1986 svo slotted cross drilled rotors and running 18x9 deep dish cobra r's and lowerd 1.5 caps fit and no rub. thats on a 1993. just saying
 
You must log in or register to reply here.
Back
Top