WTB sbf (302) parts

Boomer!

Boomer!

Club Member
I am putting a smallblock in my cousins 66 falcon, he is on a limited budget and trying to make 300 rwhp or more as cheap as possible.

28 oz, crank with balancer 2 pc main (prefer one that does not need to be turned)

Front sump oil pan

Any decent iron heads (I have e7's but really don't feel like porting them)

Flexplate

C4 trans (something that works but nothing fancy)

A mild flat tappet camshaft under or around .500" lift around 225 duration@ .050

4 barrel intake, not pickey as anything will be good for now

distributor/ignition

Let me know what you have and what you would like to get for it


Thanks :rockwoot: :rockwoot: :rockwoot:
 
I have a street dominator intake, I have purty C4 bellhousing (small bell), I have a short block with crank rods and pistons (needs to be freshen'd up), I have a E303 similar (non roller)

Let me know if you interested in any of it and I'll shoot you prices and pics.
 
igotaneed4speed said:
I have a street dominator intake, I have purty C4 bellhousing (small bell), I have a short block with crank rods and pistons (needs to be freshen'd up), I have a E303 similar (non roller)

Let me know if you interested in any of it and I'll shoot you prices and pics.
Click to expand...


PM sent.
 
I'm parting out a 90 5.0 EFI out of my Bronco if there's anything useful there, PM me. right now it's pretty much complete motor, distributor, harness, computer.
 
I have a TCI street fighter convertor, and a 157 tooth sfi flexplate, $300 or make me an offer. 734-218-1781. Jay
 
bad466 said:
I have a TCI street fighter convertor, and a 157 tooth sfi flexplate, $300 or make me an offer. 734-218-1781. Jay
Click to expand...

Thanks, nice parts but that is way more than what he needs for now.This is going to be a real mild combo and a DD for him.
 
i got world windsor s/r heads in good shape, vic jr intake, speed demon carb, hyd flat tappet cam thats around your size that you want in my 68 mustang. I put the motor together, fired it, broke in the cam, and its sat ever since :lmao:
 
I have a dirty ass front sump pan you can have for free. I also have some 5.0 heads assembled I'll sell for $40. I might have a few other things too.
 
DarkoStoj said:
i got world windsor s/r heads in good shape, vic jr intake, speed demon carb, hyd flat tappet cam thats around your size that you want in my 68 mustang. I put the motor together, fired it, broke in the cam, and its sat ever since :lmao:
Click to expand...

Check PM
 
You must log in or register to reply here.
Back
Top