wtb parts for 1988 chevy c1500 & sbc parts

[MR HYDE]

I am convrting my truck to a 350 I need the following and i am not looking to spend lots of chash
exhaust manifold or headers
steel wheels 5X5 pattern
4bbl carb around 600cfm with choke
alternator bracket long water pump
power steering pump for long water pump
motor mounts the clam parts on the motor not the frame mount

 

[dave89iroc]

are you converting from a 4.3? if so, the mounts, brackets and p/s pump will swap right over

I might still have the stock manifolds off my 94

 

[MR HYDE]

are you converting from a 4.3? if so, the mounts, brackets and p/s pump will swap right over

I might still have the stock manifolds off my 94

the 4.3 mounts have a huge plate with the clam portion welded to it & isolator mounts to the motor...the v8 mounts have no huge plate the clams mount to the motor and the isolator to the frame...my sbc dose not have the same mounting holes in the head for the large serp bracket

 

[dave89iroc]

how many holes in the front of the heads?

 

[MR HYDE]

how many holes in the front of the heads?

passanger side 1

 

[dave89iroc]

passanger side 1

ahh.....

you need old school v-belt brackets then, serp brackets need more holes, they will work, but you risk breaking the pass side bolt