Garage Clean out - bunch of EFI fox stuff and bunch of misc race stuff

[igotaneed4speed]

***** I have moved to California and am no longer local to downriver. All items include price shipped unless noted otherwise - I have pictures of all Items and can text or email them on request.*****

All parts located in 95655
Call or Text me at Seven three Four, 307, four zero 29. Ask for Derrick.

1. $250.00 - (Will trade for 105MM version or LS style 105mm TB) NEW 86-93 Mustang Accufab 90mm TB (black) has throttle cable plate with it. https://accufabracing.com/throttle-...ustang-5.0l-1986-1993-90mm-race-throttle-body
2. $50.00 - New ACL coated bearings for BBF STD mains. (half the shells are HX/.001")
3. $50.00 - Used TB Elbow LS style 102mm to 4500 with clovers.
4. $20.00 - Used Ford IAC's from foxbody (Used) have two of these.
5. $60.00 - Used Wilson Manifolds 4150 to 90MM fox TB Elbow (installs with TB pointing right or left not front to back)
6. $25.00 - NEW Grey TFI module (fox)
7. $25.00 - NEW BARO sensor (fox)
8. $80.00 - USED Trickflow .080 wall 7/16" push rods (8x) - 9.200" & (8x) - 9.550"
9. $60.00 - USED Jacobs ignitions computer ignition and coil - For TFI (comes with plug n play harness)
10. $30.00 - USED Pinion snubber for foxbody
11. $25.00 - USED 1" aluminum carb spacer 4150
12. $25.00 - NEW Torca easy seal 4" S.S. exhaust band style clamps. ( I have 2 of these price is for both)
13. $40.00 - NEW NX 4.6 liter billet fuel adapter/fuel block. (for supply nitrous kit with fuel off factory rail or can be used to supply remote fuel pressure gauge)
14. $80.00 - NEW TCI Powerglide 300M input shaft for 1.80 gear set (12 5/8" long)Part # 749200
15. $25.00 - NEW I have two of these (spares bought for trailer) Jegs SBF 1.6 ratio rocker arms 7/16" stud part number 20134
16. $20.00 - NEW LS coil mounts (remote aftermarket style mounts)
17. $60.00 - USED Billet aluminum 1/2" foxbody K member spacers with hardware.
18. $20.00 - USED Solid trans mount (GM)
19. $20.00 - NEW Proform billet anodized 4.030 ring compressor/piston installer.
20. $30.00 - NEW Billet aluminum 100mm throttle Body. Comes with weld on mounting plate if fabricating intake.
21. $220.00 - USED MSD probillet TFI distributor part # 8456
22. $80.00 - NEW MSD window switch part# 8950
23. SOLD
24. $40.00 - USED MSD window switch part# 8956
25. $25.00 - USED ABB Digiset with base.
26. $40.00 - NEW Summit roll stop kit Part #SUM-760000
27. $20.00 - USED Summit roll stop SOLENOID ONLY part # SUM-760000
28. $140.00 - USED Aeromotive SS Billet Series 140gpm fuel pump Part# 11213
29. $30.00 - NEW fiberglass header wrap 2" wide
30. $80.00 - NEW BBF front motor plate 1/4" aluminum
31. SOLD
32. $200.00 - USED Factory 1989 Engine control harness, in good shape Foxbody ECM harness
33. $500.00 - BUYER PAYS SHIPPING - Edelbrock Super victor for 351W, drilled for two foggers; comes with ONE NOS pro shot systems (no bottle)

 

[black88coupe]

I'll take the A9l. PayPal? Texted you. Mitch

 

[igotaneed4speed]

I'll take the A9l. PayPal? Texted you. Mitch

Sent ya one back.


A9L is sold.

 

[igotaneed4speed]

BMN nitrous window switch is sold.

 

[igotaneed4speed]

24lb injectors are sold.

 

[igotaneed4speed]

BUMP - This stuff has to go I will wheel an deal if you pick-up multiple items.

 

[igotaneed4speed]

Bump

 

[igotaneed4speed]

TTT excepting offers on all items. Done storing this crap

 

[igotaneed4speed]

Bump buy my stuff I dont want to move it all back with me