WTB 6.0 core

[moneypit]

6.0 core motor for rebuild project need block heads no intake needed

 

[EVI]

I have block and heads. No crank, rods or pistons. The engine had less than 5000 miles on it before someone changed the oil and didn't put any back in it. The bores are perfect. It's at the machine shop right now getting align honed. I can sell them to you for $500 after it gets align honed or $350 before. Call me at 810-407-0956 My name is Stan. Thanks

 

[xlcustoms]

6.0 core motor for rebuild project need block heads no intake needed

i have heads 241 castings complete
586-405-7007

 

[ls1sleeper]

seen the heads from XL customs clean

 

[1BADAIR]

iron or alum?

 

[moneypit]

most likely iron as im gonna throw alot of boost at it and dont need shit moving

 

[Sean124]

the iron heads flex alot and are crack prone.

most likely iron as im gonna throw alot of boost at it and dont need shit moving

 

[moneypit]

I was talking Iron block

 

[Sean124]

the ls2 aluminum and iron lq4 seem to be able to take the same amount of power. The newer gen IV iron block with DOD is alot tougher then both of those. If you want the badboy of the factory 4.0 bore blocks the Gen IV is the piece to get.

I was talking Iron block

 

[STOCK GT]

I got some 243 Zo6 heads...