WTB: 351W Heads

Blackbirdws6zzz

Blackbirdws6zzz

Forum Member
Would like "ready to bolt on heads" Don't have to be amazing, stock or something slightly better. Put up pictures/what you got. Thanks

~Josh

p.s- not looking to spend TOO MUCH. would trade stuff as well. Tell me what your looking for, car parts/other thigns
 
Blackbirdws6zzz said:
Would like "ready to bolt on heads" Don't have to be amazing, stock or something slightly better. Put up pictures/what you got. Thanks

~Josh

p.s- not looking to spend TOO MUCH. would trade stuff as well. Tell me what your looking for, car parts/other thigns
Click to expand...

May have a set of stock Mustang heads. I'll check and get the part number off them for ya.
 
got some stock large chamber truck heads, they'd probably be ok for a boosted application with a lil porting. dont 'have the valvetrain tho.
 
I have some D00E 351w heads, $50 come and get em. They are machined, 3 angle valve job, etc etc etc.... Slap on a valvetrain of your choosing and you have a nice head. I bought them to do the 351 heads on my 302 but decided to go another route.
 
heads

I have a set of World Winsdor Sr's iron. ported and polished all the way through. Fresh from the machine shop and ready to bolt on.
 
I have a set of E7's stock and a set of non-smog 351W heads stock as well. Have them all for $50.00. I dont know the #'s on the 351w heads though, where should I look?
 
I have a set of really nice DART windsor Jr. heads, fully ported, with roller rockers, ready to go. They went deep in the 10's on a little bit of spray.
 
You must log in or register to reply here.
Back
Top