WTB 302/SBF push rod guide plates...

[Jacob]

If anyone has a set of cheap guide plates they wanna sale,please message me...

Long story short,I took my TrickFlow TW heads off because they need new seals and valve guides..Building a 347/349 CI stroker when winter gets here so didn't see a reason to put them back on this engine..For now I put a set of ported 351W heads on it and wanted to put my 1.6 roller rockers on but can't,guide plates for my TrickFlow heads are different and won't work..Engine sounded very nice with the E303 cam but with stock rockers,I can't hear the thump anymore which is the one thing I really liked about it..
Im told that the rocker studs from my TrickFlow heads will screw into these stock 351W heads so if someone has some guide plates sitting around,let me know..Sounds stupid but I could care less about getting more power out of it,miss hearing my cam more than anything lol...

Thanks in adv ..

 

[notch92408]

there cheap buy em new

 

[Jacob]

Yeah I found some new ones for $24.00 but was hoping I could find some used ones I can pickup today or this weekend so im not waiting 6-7 days...if I can't find any by Sunday,i'll order some..

 

[Rickety]

I have a New set of 4816-8 Comp Cams....Yers if you want em.....

Im in Sterling Heights......18 and Ryan area....

Saso

 

[Jacob]

Sent message Rickety ...

 

[OldbutNew]

Saso beat me to it by a couple hours. Ya BUM!!

 

[Rickety]

hahaha...He's a BUNCH closer to me...

Saso beat me to it by a couple hours. Ya BUM!!

 

[Jacob]

hahaha...He's a BUNCH closer to me...

Yeah its going to be cool knowing someone else in my area ..

 

[fastredgmc]

Studs wont screw into your stock heads. trick flows and most aftermarket heads have a 7/16-14 thread on the bottom of the stud the ford heads are 5/16-18 thread. It will work with some machine work but dont waiste your time or money. You wont notice anything.

There is also a stud crane makes that you could use with no machine work but as i said i dont see putting forth the effort when you already have a better set of heads

 

[Jacob]

Studs wont screw into your stock heads. trick flows and most aftermarket heads have a 7/16-14 thread on the bottom of the stud the ford heads are 5/16-18 thread. It will work with some machine work but dont waiste your time or money. You wont notice anything.

There is also a stud crane makes that you could use with no machine work but as i said i dont see putting forth the effort when you already have a better set of heads

These are the ones I need ??? http://www.ebay.com/itm/5-16-Base-T...Parts_Accessories&hash=item2ed3bb189e&vxp=mtr ..

 

[fastredgmc]

pm sent