Winter upgrades to the sweater-vest Stang!

[98 Camaro]

No heat in that "street" car. He wears a sweater vest if it's cold.

Lol, Raj is correct

 

[Krazybones]

Great build and nice work

 

[JoeP.]

Very nice!

 

[98 Camaro]

interior project is getting closer to completion. I got the switches in for the plate. Plate will be done at the Wire EDM Place soon.....Mach1 Roy is actually doing them....he's a member on here.

 

[SuperStang90]

That desk has some good fuel pressure..

 

[BlackHawkSniper]

very cool tim nice job on everything, see you in may buddy.

 

[TWISTED]

Very nice!

 

[98 Camaro]

Changed the nitrous fuel feed line to a black one.....thought it would look better.

After a couple tries I got the correct belt size. 57-7/8".

I should be able to start it up this weekend.

Then I can finish the nitrous purge and get back to the interior and on/off switch install

 

[Speedy]

That desk has some good fuel pressure..

Yeah but it sucks too

 

[98 Camaro]

Good news is I got the nitrous 95% done. Mounted the purge solenoid under the cowl screen. I just need a compression fitting mount the purge steel line and then its done.

Solenoids are wired up - even used a weather pack!

Bad news is I got the worst case of the stomach flu on Sunday.....so I ddin't start it up. I have some stuff going on this weekend.....so it will now wait until the following week....which is fine since its so damn cold out.

 

[98 Camaro]

Purge is done. Wiring is ran into the car and now I'm working on putting the interior back together .

I was able to test the LED lights in the instrument panel and its awesome. I'll get a pic.

 

[Speedy]

Great work Tim! You can tell everything is thought out not just thrown together

 

[98 Camaro]

got a turbo blanket in.....nice piece for $40 shipped!

 

[98 Camaro]

Removing the heat caused some big holes in the firewall. I was able to cut some pieces of aluminum and rivet them to the firewall.

Last nitrous line on......kit is complete.


Blanket is on.....fits nice.


Interior is getting closer. I got the passenger side carpet vacuumed and scrubbed up. The center console is in and I will start the final wiring and interior finish up. The car will be running this weekend....then off to my Dad's house so my brother can weld up the charge pipe.

 

[MustangMorelli]

Looks awesome tim

 

[98 Camaro]

Dash Plates are done....Thanks MachOne Roy!

 

[98 Camaro]

Got the plate wrapped and all the switches and gauges in. I need longer bolts, but it's almost done

 

[orangejuiced86]

Hell ya,, nice!

 

[98 Camaro]

^ thanks Ryan!

 

[98 Camaro]

Interior is all done. Since i never really have shown pics of the interior I thought I would post a few.

Seats = Sparco Torino......not really the lightest seats around for drag racings.....54lbs a piece with the seat tracks.
Cage is wrapped in tweed. I finished the gauge plate in the same material as the Sparco's.

I got the car running and went for a ride as well.....video's to come