While I'm at it:

[Dr. Teeth]

I want to find out how many "ribs" this setup is. Do I count the ribs on the pulley or the grooves on the pulley? HELP!

 

[91trunk]

Do you have the belt?

 

[Dr. Teeth]

Do you have the belt?

Sure.

 

[The Man]

1 2 3 oclock, 4 clock rock...... 5 6 7 oclock, 8 oclock rock........

 

[Instigator]

1 2 3 oclock, 4 clock rock...... 5 6 7 oclock, 8 oclock rock........

:bowrofl: :bowrofl:

 

[Dr. Teeth]

1 2 3 oclock, 4 clock rock...... 5 6 7 oclock, 8 oclock rock........

Don't you have a mustang to work on or something?

 

[The Man]

yeah, its in the garage waiting for some parts to arrive from Saso.

what kind of blower did you get? the Powerdyne belt driven one?

 

[P.F.M.]

6 or 8 would be my guess. Count the ribs.

 

[Dr. Teeth]

6 or 8 would be my guess. Count the ribs.

Here is where my stupidity comes in. Count the peaks on the pulley, or the belt?

 

[Dr. Teeth]

yeah, its in the garage waiting for some parts to arrive from Saso.

what kind of blower did you get? the Powerdyne belt driven one?

Vortech V1 S-Trim. Nice blower, tight and smooth, just missing a bracket and most of the bolts. :rolleyes.: Not a bad deal tho. Got a 6psi and a 12 psi pulley with it. I am going to build a low CR motor for the 12psi setup and add a meth cooler then as well.

Oh, and then there's the NOS 150 shot. Gonna have some fun up here.

 

[91trunk]

Vortech V1 S-Trim. Nice blower, tight and smooth, just missing a bracket and most of the bolts. :rolleyes.: Not a bad deal tho. Got a 6psi and a 12 psi pulley with it. I am going to build a low CR motor for the 12psi setup and add a meth cooler then as well.

Oh, and then there's the NOS 150 shot. Gonna have some fun up here.

Get yourself an 8" lower pulley and a 3.125 upper. I made 14-15lbs of boost with mine. No meth needed.

BTW don't build a stock block.

 

[CMYZ28]

Get yourself an 8" lower pulley and a 3.125 upper. I made 14-15lbs of boost with mine. No meth needed.

BTW don't build a stock block.

It's a GM block, it will hold :rockwoot:

 

[91trunk]

Oopsie! I didn't realize it was a Chebby. I guess I should have read his sig :shake:

 

[P.F.M.]

Plus he cant do pulleys like that cause it uses the stock belt to drive everything. (I think)

 

[P.F.M.]

Here is where my stupidity comes in. Count the peaks on the pulley, or the belt?

If I was to guess cause I dont have a belt in front of me I would say count the ribs on the belt. It should only be 6-8. I doubt you have a10 rib setup. Plus dose this run off the main belt or is it set up like a mustang with a step out lower pulley?

 

[97blksvt]

Get yourself an 8" lower pulley and a 3.125 upper. I made 14-15lbs of boost with mine. No meth needed.

BTW don't build a stock block.

i dont see anything wrong with that block lol:bowrofl:

 

[Dr. Teeth]

If I was to guess cause I dont have a belt in front of me I would say count the ribs on the belt. It should only be 6-8. I doubt you have a10 rib setup. Plus dose this run off the main belt or is it set up like a mustang with a step out lower pulley?

Step-out pulley. I looked it up on their website and they list a 6,7, and 8. Argh!