which cam?

[wikdsvt]

2600lb car
373 gears
Aod Tran 2800 stall
302 w gt40p heads slightly ported
650 Holley
Edlbrock intake performer?

Any cam suggestions or parameters I should look for?

 

[CMYZ28]

2600lb car
373 gears
Aod Tran 2800 stall
302 w gt40p heads slightly ported
650 Holley
Edlbrock intake performer?

Any cam suggestions or parameters I should look for?

Don't forget to include tire/size you'll be running.

 

[wikdsvt]

Don't forget to include tire/size you'll be running.

I haven't gotten that far yet.

I'm thinking these:

 

[AutoRoc]

I vote B303. Sweet all seasons!

 

[PAUL WILEY]

I have had a lot of luck with this LITTLE cam.............

http://www.crower.com/ford-302-h-o-hydraulic-roller-cam-216hr223.html

Paul

 

[Pwraddr]

I have had a lot of luck with this LITTLE cam.............

http://www.crower.com/ford-302-h-o-hydraulic-roller-cam-216hr223.html

Paul

Agree...also the stock roller cam is very good and with what you have above I would not change it. I went 12.1x heavier than you with a t5 and better head. Stock cam and shifted at 5300.

 

[black88coupe]

I have had a lot of luck with this LITTLE cam.............

http://www.crower.com/ford-302-h-o-hydraulic-roller-cam-216hr223.html

Paul

What was your setup?

 

[Pwraddr]

What was your setup?

He has had many, LOL.

 

[PAUL WILEY]

He has had many, LOL.

thanks Keith....LoL

It was GT40 no port work, cobra intake, exhaust, 4.10 gear, t5, I have put a couple together with close to this set up, AOD included, cars run 11.8x 12.2x depending on driver and suspension. Sound cool also. And if you want to spray it later it is a lot of fun.

 

[wikdsvt]

I went and bought rims and tires after work today.

rears are 275 40 r17. (identical to the pictures above.)

 

[Billydroveit]

I have had a lot of luck with this LITTLE cam.............

http://www.crower.com/ford-302-h-o-hydraulic-roller-cam-216hr223.html

Paul

Looks like a nice little cam.

 

[black88coupe]

thanks Keith....LoL

It was GT40 no port work, cobra intake, exhaust, 4.10 gear, t5, I have put a couple together with close to this set up, AOD included, cars run 11.8x 12.2x depending on driver and suspension. Sound cool also. And if you want to spray it later it is a lot of fun.

Cool. Thanks for the info.

 

[OldbutNew]

I vote B303. Sweet all seasons!

I think it's an older flat-tappet engine.

 

[95_Mustang]

I say put a 3.73 in a yellow mustang and go VROOOOOM VROOOOOM.

 

[wikdsvt]

I say put a 3.73 in a yellow mustang and go VROOOOOM VROOOOOM.

with my slug car I need 410