Which balancer do I need

Looking at the ATI web site I would think you want the 918911. The site says for that part number 918911 "USE WHEN STROKING THE 302 HO WITH THE EXTERNAL BALANCE CRANK RETAINS STOCK 302 HO PULLEY LOCATION. 28.2 OZ IN IMBALANCE" I would think you want to retain the stock pulley location. The 351 or 302 use the same front dress so my money is on this one. This motor isn't going to be zero balanced?

Here's the link to their site.

http://www.atiperformanceproducts.com/products/dampers/charts/damford.htm
 
Last edited:
nitrousrick said:
Looking at the ATI web site I would think you want the 918911. The site says for that part number 918911 "USE WHEN STROKING THE 302 HO WITH THE EXTERNAL BALANCE CRANK RETAINS STOCK 302 HO PULLEY LOCATION. 28.2 OZ IN IMBALANCE" I would think you want to retain the stock pulley location. The 351 or 302 use the same front dress so my money is on this one. This motor isn't going to be zero balanced?

Here's the link to their site.

http://www.atiperformanceproducts.com/products/dampers/charts/damford.htm
Click to expand...


Nope ran into a snag on the 0 blalance thing. Everything became so screwed up just gonna use the 28oz I'm already set up for. My stuff was 28oz, seems like everything is 650 to rebalance what I have. Scat or Eagle don't make the crank I need so I would have to replace the rods and crank. So at this point I might as well just buy a whole new stroker kit, but I plan on going to a twin turbo setup next year, so replacing the stuff now just doesn't seem logical.

Ford raing makes the crank I need but at 800 bucks, hell might as well wait until I buy an eagle kit. The one I have now is scat (cast shot peened) with ford rod journals, but scat only makes a cast crank with ford rod journals and a 3.85 stroke, eagle doesn't even make that stroke, and scat doesn't make that rod journal size in a 4340.

It's a mess. Tired of thinking about it so I'm just putting it together as is and running the heck out of it..

A351 block
393
14.7 to 1
trickflow-HP stage 3
super victor stage 3
1088 dominator
H beam scat rods
shot peened scat cast crank
 
You must log in or register to reply here.
Back
Top