where to get 36" 6 rib belt locally?

Don't know where to get them local, but I'm going to put the part #'s out there for the near future when I may be looking myself, and of course for anyone else looking lol.

Dayco 5060360

Goodyear 4060360

Good luck in your search.
 
Thanks for the part #. Upon searching those numbers is seems the gatorback are cheapest and on Ebay. Got one for 6.25 shipped!
 
Not sure what you are running for a setup, but this is for alternator only and running the Moroso 63810 alt kit with the alternator mounted on the drivers side. Just for future reference :D
 
SuperStang90 said:
Not sure what you are running for a setup, but this is for alternator only and running the Moroso 63810 alt kit with the alternator mounted on the drivers side. Just for future reference :D
Click to expand...

NP, and I'm going to be running water pump, alternator and crank only. Alternator will still be on the p-side while using a reverse rotation wp. Haven't gotten far enough on the engine build to figure out what I need yet but it's going to be short.
 
DItch the revese pump and use the march alt bracket. TOo much BS to keep the reverse in a 3 pulley set up. I was cheap baught a cheap copy e bay March Alt set up from E bay and i was perfect. I even used the reverse smooth no groove pulley for 6 years never had a problem.
 
1126091527.jpg
 
Nice! I just picked up a wp for a 90 Crown Vic on Monday that is opposite rotation from stock on the fox. Now looking at that set up that you posted it would be spinning in the stock direction right?
 
If you're getting the gatorback belt, I'd suggest ordering an inch smaller than you need.
Never had good luck with them staying the right size for any duration.
 
TooSlo86 said:
Nice! I just picked up a wp for a 90 Crown Vic on Monday that is opposite rotation from stock on the fox. Now looking at that set up that you posted it would be spinning in the stock direction right?
Click to expand...

My picture is rotating the water pump standard rotation(non fox stock). Fox EFI Stock is Reverse rotation. Think my pump was from an early v8 mustang, like 80 or so. Been a while since i baught it.
 
For other's who may end up looking in the future. This is how mine turned out. I actually ended up with a 37" belt. Oh yea, and Advance had several around that in stock, 37" 370k6, 38" 380k6, etc

10271472_688113607935645_4137776897537975224_n.jpg
 
You must log in or register to reply here.
Back
Top