Wheel spacers

SVTSINR

SVTSINR

Club Member
I wanted to get your opinion on wheel spacers. I need to run a 7/16 spacer for the rear to clear the caliper bracket. So I put on the universal Mr.Gasket spacer with slots. My question is with the slots and not being hub centric the spacer has slop and will not be centered on the rotor. Do you think this will cause a vibration?

BTW I have 3" studs and shoulder lugs.
TIA
 
SVTSINR said:
I wanted to get your opinion on wheel spacers. I need to run a 7/16 spacer for the rear to clear the caliper bracket. So I put on the universal Mr.Gasket spacer with slots. My question is with the slots and not being hub centric the spacer has slop and will not be centered on the rotor. Do you think this will cause a vibration?

BTW I have 3" studs and shoulder lugs.
TIA
Click to expand...

mine are fine! hope that help's!
 
I've run them with no problems. I just make sure that the lug fits through the hole and is flush with the hub. I've seen SSO cars in the 7's run the generic style spacers so I wouldn't worry about it.
 
i have worked with rim/tires for like 4 years and I wouldnt worry about the spacers not being hub centric. Those rings really dont do all that much. if the tire is balanced correctly and the tire is good it will be fine
 
steelhorse92 said:
i have worked with rim/tires for like 4 years and I wouldnt worry about the spacers not being hub centric. Those rings really dont do all that much. if the tire is balanced correctly and the tire is good it will be fine
Click to expand...

Wrong on certain cars with aftermarket wheels you need the hub centric ring or else it will vibb bad at odd speeds, like toyota, lexus, and some gm cars
 
You must log in or register to reply here.
Back
Top