What is your opinion of this mustang what is it worth

[fyoung7]

I have seen this on ebay twice now
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110563553980&ru=http%3A%2F%2Fmotors.shop.ebay.com%3A80%2F__%3F_from%3DR40%26_trksid%3Dp4712.m39.l1313%26_nkw%3D110563553980%26_sacat%3D%26_fvi%3D1&_rdc=1

You will have to go down to the bottom of the page because the bidding has ended but i talked to him and he said the lowest he will go is 9500.00 is it worth it or can i find something better for that price.

oh i think i would get rid a the black stripe

 

[daveg]

A carb swap kills these cars. Just a tick south of 10 stacks will buy a hell of a street car (turbo/blower) so I would pass.

 

[4Gas$]

Keep looking....

There is a reason the "high bid" was $6,700.
The market has spoken - that is the price.

There are a lot of very fine cars that can be had
for $10,000 right now.

 

[Golden]

Agreed with daveg and 4Gas$. No way is that worth $10k IMO.

 

[82hatch]

There is a reason the "high bid" was $6,700.
The market has spoken - that is the price.

There are a lot of very fine cars that can be had
for $10,000 right now.

x2 Way to high

 

[daveg]

Its worth it to someone looking for "that" car. It has a ton of nice parts. Just not what I would build for the price.

 

[fyoung7]

for anyone else to look at it the add has been removed here was the info.
Below I have listed all the mods installed.

347 Stroker built by T and B’z out of WI 495Horsepower
850 Pro form Carb
Billet K&N Air Cleaner
Holley Heat Spacer
Victor Jr. Polished Intake
Stroker Kit
Moroso Windage Tray
Moroso 7 qt oil pan
1.72 Roller Rockers
Trickflow Track Heat heads
Trickflow State 2 Cam
Ford Racing Polished Tall Valve Covers
Ford Racing High Volume Oil Pump
Professional Products Harmonic Balancer

SUSPENSION:
70/30 Drag Struts
50/50 Drag Drag Shocks
Drag Springs with Air Bags
Life Bars
Granatti adjustable upper control arms
lower control arm reinforcement

DRIVE TRAIN
5 SP Manual Transmission
Center force duel friction clutch
ford Racing Aluminum Drive Shaft
Detroit true trac posis rear-end
Mo0ser 31 Spline Axles
Trickflow diff. cover
Richmond 3:73 Gears
Hurst Shorty Shifter
Adjustable Clutch Cable
Ford Racing Clutch Quadrant

EXHAUST
3" Stainless from headers back
2 chamber flow master mufflers
BBK Equal length headers

EXTERIOR
Custom Orange Paint (Huger Orange)
4" Cowl Hood

INTERIOR
Ford Racing Oil Press Gage
Sun Pro Temp Gage
5" monster autometer tach with shift light
8PT Roll Cage
5PT harness
APC Fire extinguisher
Window Tint
Battery Box in Trunk
Battery shut off switch
White Face Gauges

FUEL System:
Aeromotive fuel pump
Sump in gas Tank
UPR Fueld filter
JEGS Fuel Rails
Holley Fuel Regulator
Braided Fuel Lines

IGNITION:
MSD Distributor,
MSD COID,
MSD 6AL, 2 Step
MSD Rev Limiter
Trick flow 10 mm plug wires

MISC.
Frame Connectors
B&M Line Lock
Weld Racing Rims
275/50/15 Mickey Thompson Drag Radials
165/15 Front Tires
Cross Drilled and Slotted Rotors
Underdrive Pulleys
Electric Fan
Ford Racing Radiator

I do like the orange. if you were to offer some thing for what would you offer

 

[The Man]

the rear bumper cover shows the type of details the owner went through. :nono:

 

[MDavey]

I'd pay $6500 for it

 

[nuttsgt]

I think whoever did the roll bar was an idiot to cut and reweld the back bars like that. The battery box also requires a firewall, as it's just a cheap one that's not sealed and vented to the outside. Don't get me wrong, it's a nice looking car but not worth 9500, the 65 or 67oo is more in line, especially with the economy.


FWIW, the car is about 25 minutes from me. From Flat Rock, take 23/75 south, go east on US 30 at Upper Sandusky, near Mansfield take the 314 exit to Lexington, think Mid-Ohio.

 

[fyoung7]

wow so far no more then 7000.00. This should be pretty funny if i do offer him something like that. Keep the comments comming

 

[cjmatt]

may be worth 6000. that car wasnt worth 10k at the height of the buying craze. Remember that it didnt even hit its reserve, so people will bid more than they normally would since it doesnt make a difference

 

[outlawdan]

If it had a better trans I might pay more then $7000. but that is top dollar now.

 

[Tin]

the rear bumper cover shows the type of details the owner went through. :nono:

Ghetto-fabulous

I remember when cutting holes in the bumpers of GTs was the "in" thing to do 10+ years ago....I always wondered how so many people fell and bumped their heads at the same time.

 

[91trunk]

10K for that thing? Man I should be able to get 20k for mine :lol:

 

[DSG SNAKE]

may be worth 6000. that car wasnt worth 10k at the height of the buying craze. Remember that it didnt even hit its reserve, so people will bid more than they normally would since it doesnt make a difference

I've also seen cases where people don't bid because they think they are wasting their time if the seller has a sky high reserve

 

[90blknotch]

Its a GT hatch - cheapest body style to buy! If it was a clean notch I would say 8-8.5K but as a GT with holes in the bumper (dumb), carbed, and the useless cut and welded cage (wont pass tech) I would say 6-6.5K tops. I wouldn't pay more than $5500 for that car. he should have taken the $6.7k high bid and ran!

 

[fyoung7]

Hey guys back on ebay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110569882090&viewitem=&sspagename=ADME%3AB%3AWNARL%3AUS%3A1123

check the price now!!!

Some one should ask this guy about his cage and see what he has to say!!

 

[turbo89gt]

No way....Too much, looks kinda clean tho..........BUT the worst thing ANYONE can do to a fox GT is cut holes for tail pipes.......FOR GOD SAKE get an LX if you want straight tail pipes!!!!!! Or even the cobra cover, and keep the GT kit on the rest!!! The drives me INSANE>

 

[sofa king]

Loud pipes big rims
Wodie thats our life
When we pull up at the club
Sorry thats our night
I know a lot of haters out there sayin
That thats not right
But our diamonds are much bigger
So thats our life

If it doesn't sell once for your reserve, the best thing to do is raise the price...
I'll have to try that.