WANTED ..>>>> MUSTANG..ABS SENSORS

B

BOB ROME

New member
Need rear wheel(s) ABS sensors for both sides from 1994, 1995, or 1996 Mustang

Bob Rome

workdays: [email protected]

nights & weekends: [email protected]


ALSO WANT TO BUY OR TRADE:

sn95 "STANG" COBRA STRUT TOWER BRACE

Must fit over COBRA intake on 1994/1995 5.0

Have same for non-cobra will trade or BUY
 

Attachments

  • sensors.jpg
    sensors.jpg
    3.3 KB · Views: 29
Last edited:
I got some ABS Sensors from a 98 Cobra, what you want to pay for them.
I Also have a Strut tower Braces from a 96 GT and 98 Cobra , make offers :D
 
Moneypit,

The local Ford dealer told me that all '94, '95, and '96 Stangs use the same sensors (V6, GT, & Cobra, auto, 5 speed, traction or not)

So if you have some how much?


moneypit said:
gt or V6 and traction control?
Click to expand...
 
STOCK GT

Sensors must be from '94, '95, or '96 can't use '98
Strut brace must be for '94, '95 Cobra or aftermarket to fit over 5.0 cobra intake


STOCK GT said:
I got some ABS Sensors from a 98 Cobra, what you want to pay for them.
I Also have a Strut tower Braces from a 96 GT and 98 Cobra , make offers :D
Click to expand...
 
I have some i can take off my 96 cause i dont use Abs anymore.
Ive put the GT STB on a 5.0 and it fit...
 
BOB ROME said:
The local Ford dealer told me that all '94, '95, and '96 Stangs use the same sensors (V6, GT, & Cobra, auto, 5 speed, traction or not)

So if you have some how much?
Click to expand...


I work in ford parts and get a resonable discount
 
STOCK GT

if you can get them off I would take them. There held in with one bolt, but my backing plates were rusted & sensors seized in and had to be broken to get out! Easy 5 min. job if they pop out! How much you want? I can get them from a motorcraft supplier for $32
I have the GT STB on my car now, but was told that in won't fit over the Cobra intake that I am going to put on!?


STOCK GT said:
I have some i can take off my 96 cause i dont use Abs anymore.
Ive put the GT STB on a 5.0 and it fit...
Click to expand...
 
moneypit

I can get them from a motorcraft supplier for $32
(but it's a favor and i'll owe him!!!)
Could you get me a price in case i can't get some used ones.
Thanks
Bob


moneypit said:
I work in ford parts and get a resonable discount
Click to expand...
 
You must log in or register to reply here.
Back
Top