Twins?

[INJCTED]

My buddy has these turbos laying around hes given me some sizes

Compressor .60 A/R Compressor
Turbine 1.0A/R Turbine

Compressor Wheel
Exducer: 2.32"
Mayor:3.00"

Turbine t4 flange
Exducer: 2.07"
Mayor:2.36"

and he has these also

Inlet Size 4"
Outlet Size 2.5"
Compressor .70 AR Compressor
Compressor Wheel .60 T Compressor Wheel
Exducer: 3" , Inducer: 2"

Turbine .63 AR Turbine
Turbine Wheel Exducer: 2.2" , INducer: 2.58"
Type of Flange T3



Im looking for a twin or a single to get full boost by 3800 cause of my cam and converter

Im switching to an AOD this winter

Would these work for a twin setup?

 

[INJCTED]

Anybody

 

[SVTSINR]

The first one has too large of an exhaust housing of 1.0 a/r and to small of a compressor.

The second one has a more ideal exhaust housing of .63 which is not to bad for twins. If you look at most twin kits they will recommend .58.

FWIW When you plan on running turbos you should plan on getting a match converter.

 

[INJCTED]

where do yo u think the second pair will spool up at?

 

[SVTSINR]

There's way to many variables for me to give you answer. I've never ran twins so I don't any have experience.

your best bet is to read www.turbomustangs.com

 

[Sean]

Engine information please. Everything you have.