Tuned!! And the results are in!!

[Mike's 03]

Just had my BF 2.76 and 100mm idler installed and complete dyno tune by Lidio @ Alternative Auto...

Overall I am happy with the numbers--it was 85 degrees yesterday and I KNOW the tune is safe.

448 RWHP and 475 RWTQ

Thanks again Lidio :rockon:

 

[2001-WS6]

Congrats. Enjoy the car. :bigthumb:

Rick

 

[b.lee]

Feel like sharing a mod list?

 

[99Electriccobra]

Yeah, interested to know what it takes, congrat's on the #'s. I want to get mine over the 500 "hump" myself soon.:specool:

 

[Deuce450]

Just had my BF 2.76 and 100mm idler installed and complete dyno tune by Lidio @ Alternative Auto...

Overall I am happy with the numbers--it was 85 degrees yesterday and I KNOW the tune is safe.

448 RWHP and 475 RWTQ

Thanks again Lidio :rockon:

Now just drive that b@#ch!

 

[postban]

Feel like sharing a mod list?

Must be fairly stock 'cept for the pulley and that intake. Can't see the injectors or the MAF to tell.

Enjoy that torque! Get it ported. and then STOP!

I am spectacularly qualified to give that advice. :emb:

 

[Mike's 03]

Feel like sharing a mod list?

Sure...

Steeda Tri-Ax; Borla Stinger Cat-Back; Bassani catted x-pipe; JLT RAI; H & R Sport (stock ISOs); BF IRS Brace; Kenny Brown FLSC, MRT Caster/Camber; BF 2.76 w/ 100mm idler and tuned by Lidio @ Alternative Auto

Copied and pasted from my sig on SVTP.

I would like to add a Whipple, but $$$$$

 

[postban]

Sure...

Steeda Tri-Ax; Borla Stinger Cat-Back; Bassani catted x-pipe; JLT RAI; H & R Sport (stock ISOs); BF IRS Brace; Kenny Brown FLSC, MRT Caster/Camber; BF 2.76 w/ 100mm idler and tuned by Lidio @ Alternative Auto

Copied and pasted from my sig on SVTP.

I would like to add a Whipple, but $$$$$

they can hear you coming, I had that same combo, for a while

 

[KimKim]

I would like to add a Whipple, but $$$$$

If you scrounge up the money for a whipple, don't post it here or else I might expect you to pay for that Motown shirt, ya deadbeat. :emb:

 

[lab1702]

If you scrounge up the money for a whipple, don't post it here or else I might expect you to pay for that Motown shirt, ya deadbeat. :emb:

:lol:

 

[Mike's 03]

If you scrounge up the money for a whipple, don't post it here or else I might expect you to pay for that Motown shirt, ya deadbeat. :emb:

You are killing me...PM that paypal address now please....

 

[Venmous28]

i didnt think he was that bad of a guy.. :lol:

 

[TWISTED]

I dropped my mystic vert off yesterday and saw your car strapped onto the dyno. That car looks clean as hell. Very sharp looking car:hail: I noticed you have nitto 315's on it. Are you running any spacers or have to go through any bs for them to fit- Car has a great stance.

 

[Mike's 03]

I dropped my mystic vert off yesterday and saw your car strapped onto the dyno. That car looks clean as hell. Very sharp looking car:hail: I noticed you have nitto 315's on it. Are you running any spacers or have to go through any bs for them to fit- Car has a great stance.

Thanks!! No spacers needed--I did install the MM low profile IRS bolts though and I am using a replica 03 wheel @ 17 x 10.5.

 

[Mike's 03]

i didnt think he was that bad of a guy.. :lol:

Kimkim: please respond soon...you are killing me. What do I owe you?? I need to be debt free...lol

 

[TWISTED]

Thanks for the info. +1 for ya

 

[Venmous28]

Kimkim: please respond soon...you are killing me. What do I owe you?? I need to be debt free...lol

dont mind her, she has her moments.. :seizure:

 

[DetroitStyle]

Enjoy that torque! Get it ported. and then STOP!

I am spectacularly qualified to give that advice. :emb:

:lol: