Stalker
I removed my teeth on purpose....if you catch my d
So it's not stock.
Tune!?
- Thread starter GerRrg281
- Start date
So it's not stock.
OnyxSSS
Forum Member
LOL at this tread.
if the leak was SO bad the tuner would have seen it in the WB and proceeded accordingly (IE stop tuning and tell customer)
BUt if it downstream of the O2's (like inplace of one of the O2's or inplace of the rear sensor) it should have little effect on any of the tuning...
if it was your buddy in his car port, then I would worry...but with this shop, their rep is SO high, I would not second guess their work unless you are equally qualified( and if that was the case you would have done it yourself)
the nooner cant get here quicke enough for some of you guys
if the leak was SO bad the tuner would have seen it in the WB and proceeded accordingly (IE stop tuning and tell customer)
BUt if it downstream of the O2's (like inplace of one of the O2's or inplace of the rear sensor) it should have little effect on any of the tuning...
if it was your buddy in his car port, then I would worry...but with this shop, their rep is SO high, I would not second guess their work unless you are equally qualified( and if that was the case you would have done it yourself)
the nooner cant get here quicke enough for some of you guys
sardeanie
Club Member
You MUST be new here! TRBOBUICK is FAMOUS around these parts.
TRBOBUICK
Club Member
Someone that brags about what kind of book knowledge they have , but does not possess the skills to replace his or her own headers is not a car guy. It always given me a chuckle wherever i went when people whip out degrees and certs and cannot back it up with practical skills. You did cams a springs? Wow. Thats some straight up gangsta auto repair. Did you do that in your fancy car port ? or a garage ?
Who am i ? Im a guy that HAS installed headers on a mod motor mustang. I am a guy with Michigan certs for automotive repair . I am a guy with a licence in aircraft powerplant and airframe repair in accordace with the FAA. I am a guy that built my own 10 second car from the frame up. Pretty much, im your fucking daddy, and you will address me as such !!
BigWheelinBubba
Club Member
:haha: :roll:
moneypit
Club Member
TRBOBUICK
Club Member
At mens warehouse, they call me "excecutive cut" ! You are asshole !!
Pwraddr
Forum Member
you must have a small cock if you have a reputation of getting in pissing matches with people on a forum.
anybody could install long tube headers given the tools and time. in which i have neither. Just because I did not do the install myself does not mean I am not capable of doing the install myself.
Just because I know how to do an oil change doesnt mean im going to change my own oil every time my cars need it.....whats the point when you can take it somewhere and save yourself the hassle.
$uperstang
Club Member
:roll:
TRBOBUICK
Club Member
You must have no balls then. Since you whine like a little bitch .
I did the headers on a garage floor , on jackstands with hand tools. How did you change your cams ? With your bare hands ?
After reading this post on another forum... you sure do come off as a master tech : http://mustangboards.com/modular-4-6l-tech/26935-cam-install-questions.html
and here : http://mustangboards.com/modular-4-6l-tech/26552-cams-winter-project.html
Good job on getting an "A" on that ONE engine rebuilding class.
Listen...you came on here like a huge douche and was called on it. Grow up. We are a hell of a lot nicer than chitown racing is. Admit you fucked up and join the group. We are really tight knit so we protect our own. You can either join one of the best car clubs in the country or be a big baby and cry. Your choice.
PS if you join, you get to see me at the Woodward lot getting hammered and/or pole dancing and/or getting naked. Maybe two or all. Im not sure what my theme will be this year.
MxRacerCam
Club Member
wow, talk about an incentive to join. :/
i've spent the past few years trying to erase the nightmare that is the vision of your peter griffins fatter uglier twin looking ass, in various states of undress, out on woodward.
TRBOBUICK
Club Member
wow, talk about an incentive to join. :/
i've spent the past few years trying to erase the that vision of your ass in various states of undress , out of my spank bank.
Fixed for reality .
MxRacerCam
Club Member
BigWheelinBubba
Club Member
Knowing Brian... all of the above :lol:
OldbutNew
Club Member
GerRrg281: Dude, I don't know you by anything more than what I have read in this train wreck of a thread. I am however convinced you thoroughly enjoy creating controversy. 1. You jump onto this forum trashing someone's business. 2. You had NO CLUE that he was so well-regarded, and didn't take the time to find out. 3. Then you call out another well-regarded guy on the forum. 4. You brag about installing your own cam and springs? Wow. Impressive. There are people here who DO THEIR OWN CASTINGS AND MACHINE THEM. 5. NOW you're throwing the "I have a degree and work for Ford" crap out there. GUESS WHAT?? That is incredibly lame. Do you have any idea how many Ford employees there are on here? What a wide, wide range of jobs ALL OVER the auto industry are represented here? And you have the gall to come out with "Get a life"? My advise to you is to shut up, hang out until you get a sense of what the deal is here, then try to keep your inflated ego under control long enough to blend in.
Hotrodhawk
Club Member
Is this a possibly a new "supra paul" in the making? :chairfall