True Duals On My '95 Camaro

[95 Z/28 LT1]

I had a local shop put true dual exhaust on my Camaro. Here are some pictures of the process and final results. Very pleased with the ground clearance and the workmanship.

I brought in all the pieces and parts from 3" mandrel bent stainless and this is what was done:

After moving the car over to the two-post lift, to mount/balance a pair of M/T ET street radials, we realized it didn't have quite enough driveshaft clearance.

FIXED:

 

[mustang86super]

lets hear it

 

[95 Z/28 LT1]

lets hear it

http://i27.photobucket.com/albums/c151/rlsracing/VID_20130919_084918_zps8a5b6f8b.mp4

http://s27.photobucket.com/user/rlsracing/media/VID_20130919_084918_zps8a5b6f8b.mp4.html

 

[AutoRoc]

That's nice work and should help keep fumes out of the car, something I need too..A before and after video?! I bet it still barks like a beast.. Only way to quiet a blower setup is take the blower off.

 

[95 Z/28 LT1]

[video]http://s27.photobucket.com/user/rlsracing/media/20130919_110208_zpsd2c78d4b.mp4.html[/video]

 

[1BADAIR]

cool. who cut the rear seat buckets out?

 

[ovrkill]

Nice work....

 

[Ponyryd]

Looks like they did an awesome job, car is hella clean for its age. Did they just loop a clamp hoop over the pipe for the welder ground?

 

[fogule89]

thats sick sounds awesome good work

 

[1fstfox]

Looks damn good! Wish ny phone would load the video so I could hear it

Looks like they did an awesome job, car is hella clean for its age. Did they just loop a clamp hoop over the pipe for the welder ground?

Looks like they have the same set-up I did when I worked in an exhaust shop. I welded a u bolt style clamp to the ground. Then it just hangs on the exhaust. works wonders compared to trying to clamp your ground over 3 inch pipe, or fighting the magnetic grounds on round tubing. Lol

Sent from an undisclosed location using Tapatalk4

 

[WIspartan1026]

So. Much. Want. :drool:

 

[95 Z/28 LT1]

cool. who cut the rear seat buckets out?

Was done a long time ago at different shops when the car was in Michigan. Driver's side was done when the torque arm was installed, the passenger side was done to better fit the Mufflex 4" that was on it for a little while.

Nice work....

Thank you.

Looks like they did an awesome job, car is hella clean for its age. Did they just loop a clamp hoop over the pipe for the welder ground?

Thanks. The car has 39K miles, I'm the second owner. Car originally came from Kalamazoo and was owned by a guy named Peter Bolt. I'll bet there are people on the board who knew/know him. He'd probably laugh if he heard the story of the car since I bought it from him.

thats sick sounds awesome good work

Thanks!

Looks damn good! Wish ny phone would load the video so I could hear it




Looks like they have the same set-up I did when I worked in an exhaust shop. I welded a u bolt style clamp to the ground. Then it just hangs on the exhaust. works wonders compared to trying to clamp your ground over 3 inch pipe, or fighting the magnetic grounds on round tubing. Lol

Sent from an undisclosed location using Tapatalk4

Thanks. The shop that did the work has a great reputation for quality work.

 

[Birdie2000]

Looks AWESOME Jacob. Glad to see the car's still alive and kickin'.

 

[cASe SenSiTive]

Sweet!

 

[My1969boss]

Where did you buy the mandrel bends from? I've been looking locally and can't find anything.

Sent from my VS870 4G using Tapatalk