tremec trans

carpetcleaner

Forum Member
i putting a tremec 5 speed trans in my car . now that its in the trans mount is not lining up.i can get it to fit ,but the mount is cocked to the front of the car . so i go to the old trans and the mount hole on the tremec are 1'' back from the OEM t5 is there a mount i can buy or do i need a crossmember made
 
i putting a tremec 5 speed trans in my car . now that its in the trans mount is not lining up.i can get it to fit ,but the mount is cocked to the front of the car . so i go to the old trans and the mount hole on the tremec are 1'' back from the OEM t5 is there a mount i can buy or do i need a crossmember made

do you have the crossmember with the round tubes(bushings inside) at the ends? If so, you can cut the spot welds and move it forwards or backwards, then spot it back to the tubes
 
Last edited:
Back
Top