Tips on making the WELDON quiet.

2L8IWIN

2L8IWIN

Club Member
I've heard of rubber rubber mounts with a voltage controller hooked up to a hobbs switch (pump only comes on 100% when Xlbs of boost)...any other ideas? I dont particularly care for loud ass fuel pumps...but its required at a certain level of slowness.
 
Last edited:
I have used rubber sway bar bushings old ones that are soft to mount them on or use shock bushings. You have to isolate everything you should even grommet the hole the bolt goes through. What you are trying to avoid is directly coupling the noise making device with hard surfaces.. It helps but its doesn't make it dead silent.

Sean

8URZ0H6 said:
I've heard of rubber rubber mounts with a voltage controller hooked up to a hobbs switch (pump only comes on 100% when Xlbs of boost)...any other ideas? I dont particularly care for loud ass fuel pumps...but its required at a certain level of slowness.
Click to expand...
 
Noisy electric fuel pumps

As a friend pointed out to me -- if you can hear it, then you know it's working! But it's still irritating.
 
I have that same problem. I'm going to try rubber mounting mine and some dynamat
 
use something like these

aei-11601_w.jpg
 
the weldon pump controller works great for me, really helped with noise level.

how do you hook up a hobbs switch to make it work? id like to do that instead of using the manual switch for the pump controller.

adam
 
You must log in or register to reply here.
Back
Top