the s10 project

stroked10 said:
Umm well I have a currie bolt in 9" with caltracs and for now I have belltech drop spindles.I'm going to see how those springs work if they don't work then I'm gonna gow ith the slip mono leaf.what kinda system do you have in mind
Click to expand...

^^^this set up will work perfect .

shit i went 9.86 with all stock suspension and slapper bars , ill sell you that junk...lol
 
stroked10 said:
Lol well shit that's fast.why did you switch to ladder bar?
Click to expand...

i dont have a good answer for that.....i wouldnt do it again ..

if i would of looked into caltrac's more i would of went that route...


but i did step it up alittle i went 9.63 in the 1/4 and still doing some adjustments
 
a few more pics
alexsphone061.jpg

alexsphone091.jpg

alexsphone095.jpg

alexsphone023-1.jpg

alexsphone085.jpg

alexsphone031.jpg

alexsphone022.jpg
 
thank you its getting there almost done just have to go through and finish some stuff up that i started and didnt finish.
 
well i finally got my brakes and fab up the spindles>not much just drill 2 holes bigger and tap them and cut the old mounting brakets off for the calipers.

alexsphone108.jpg

alexsphone109.jpg

alexsphone110.jpg
 
well i just ordered everything to get the truck running.fuel cell fuel line radiator spark plugs and wires distributor hold down and thermostat housing.and im buying a barry grant 400 fuel pump from wayne. i already have a barry grant 220 for the nitrous up front.
 
finally put the brakes on the car they fit like a glove now i have to try and make some braided lines for the front.the truck is almost done just going back through and finishing things up and i didnt finish all the way.
 
well im taking one step forward two steps back. i decided to take the dash out and wrap it in black vinyl. then change the whole interior color to black my seats are at the upholsers house right now im doing the black vinyl on the outside and the pinhole thats on the cluster bezel in the one pic on the centers of the seats then the same with the center console i made. and hes doing my door panels he had to cut the arm rests off and fill them in flat cuz the cage is in the way.and while the dash is out in going to run a bar from pillar to pillar under the dash.

alexsphone066-1.jpg

alexsphone067.jpg
alexsphone069.jpg

alexsphone070.jpg

alexsphone071.jpg

alexsphone079.jpg

alexsphone080.jpg

alexsphone068.jpg

alexsphone072.jpg
 
thank you hows your car coming? that thing is sick also. still havent done the rearend yet the old nasty one is in there i cant wait to get that 9'' in there.
 
You must log in or register to reply here.
Back
Top