the s10 project

[SBCS10]

well mayb we can figure sumthing out. i cant set anything up now tho but come spring we can talk

 

[stroked10]

soo just take the booster off make a 3/4 inch plate and bolt my master to it.

 

[stroked10]

why does that plate have to been so thick?.and the stock proporting valve works any everything.seems simple enough

 

[bigg]

my plate is pretty thin ......ill go see

 

[bigg]

my plate is pretty thin ......ill go see

no joke mine is 1/8 inch lol...and do yourself a favor drill a hole in the pedal arm 2 inches above the stud that the rod hooks on and thru bolt the rod in the higher hole ......it will give you more pedal and has a much nicer feel...

btw i used a hardened bolt long enough to double nut it and i drilled the end for a cotter pin.......i learned the hard way !!

 

[stroked10]

right cuz i went to parts galore and seen them there i was gonna grab the setup which i am now but anyways the plate was only like 1/16 thick.

 

[bigg]

right cuz i went to parts galore and seen them there i was gonna grab the setup which i am now but anyways the plate was only like 1/16 thick.

use it , mine is prolly the same one

 

[stroked10]

wait what drill a hole where on the brake pedal arm?.

 

[stroked10]

is the rod a different lenght for paower brakes verus manual?

 

[bigg]

about 2 inches above the stud where the rod hooks on now

 

[bigg]

is the rod a different lenght for paower brakes verus manual?

im not shure .....

 

[SBCS10]

its not that thick, i just measured it out so i didnt have to lengthn or shorten parts i dont know if it makes a difference but mines a 95 and your 2 are 93 or later.

 

[SBCS10]

thats why i made the plate how i did so i can use the stock rod.

 

[stroked10]

ok and use 2 nuts so the rod can still pivit and put a cotter pin on the end so the nut doesnt come off that makes since.but why move a better angle or something.

 

[stroked10]

oh ok yea im gonna go to parts galore and grab the rod the plate and whatever else looks cifferent then mine.can i use my master ?

 

[stroked10]

if got aerospace brakes all the way around so im gonna have to chage my proporting valve anyways right?.with a newer s series that 4 wheels discs.

 

[bigg]

i double nutt'd mine becouse i had the bolt fall out !! on a main road after a bonzi burnout....yeah i shit my pants


2 nuts jammed to leave some wiggle and a cotter pin thru the bolt to save your life !!!

 

[bigg]

i still use a factory master

 

[bigg]

moving the rod up will give you more peddle (a more firm peddle)

 

[stroked10]

2 nuts jammed to leave some wiggle and a cotter pin thru the bolt to save your life !!! lmao