the s10 project

That thing looks bad ass man! I didn't even realize it was a 1st gen until I seen the dash and that seat...I had seats like that in my 94 Jimmy! My new daily driver is a 94 Bravada so ya I love the 1st gens lol. Keep up the good work!
 
afew updates,

my hood
SU1HMDAxMTUtMjAwOTExMDItMTIyNy5qcGc.jpg


fenderwells i shaved all the holes and fixed a lil rust spot
SU1HMDAxMTAtMjAwOTEwMjgtMTE1NS5qcGc.jpg


after i primed the fenderwells
SU1HMDAxMTctMjAwOTExMDUtMTE1NS5qcGc.jpg


the bumper after i cut like 30 little ovals to fill the inpact strip holes
SU1HMDAwNjYtMjAwOTA5MjktMTAyOC5qcGc.jpg


bumper after the first coat of bondo
SU1HMDAwNjgtMjAwOTEwMDEtMTY1Mi5qcGc.jpg
 
yea i have 1 right now of the alternator all mounted up but this weekend the bed is getting painted on the out side and i bought a line x kit and im spraying the inside with the line x shit.so wednesday i will take some pics.
 
a few updates nothing big

ok this is a 28x10.5 on a 10 inch rim
SU1HMDAxNTctMjAwOTExMjgtMjIzOS5qcGc.jpg

this is the alternatorits just a black powder coated 150 amp alt 1 wire
SU1HMDAxNDgtMjAwOTExMjYtMTUxNS5qcGc.jpg

this is the trans cross member i made from 1 7/8 piping i hope it holds lol
SU1HMDAxMzQtMjAwOTExMTItMTkxNi5qcGc.jpg

this is the under side of the bed i had to replace the last 2 rails and about 6 inches of the floor
SU1HMDAxNTAtMjAwOTExMjctMTQwNi5qcGc.jpg
 
one thinkg i would do is go with manual brakes if you have a decent cam i had a hell of a time stop before i switched.

just my 2cents

other then that it looks great
 
yea a race sure that would be fun im sure you got twice the motor i have.and it looks like twice the tire too.
 
stroked10 said:
yea whats all involved in switching it i wanted to but didnt know what to do to switch to manual brakes.
Click to expand...

i made this plate to replace the booster and used the stock rod and master cylinder and dont have any problems hope this can help

102_0072_00.jpg

102_0092.jpg

102_0093_00.jpg

102_0094_00.jpg
 
SBCS10 said:
i made this plate to replace the booster and used the stock rod and master cylinder and dont have any problems hope this can help

102_0072_00.jpg

102_0092.jpg

102_0093_00.jpg

102_0094_00.jpg
Click to expand...

hey sbcs10 do you race you truck??????


i see you have spray on it are we gonna get a race off in the spring?:thumbsup:
 
fogged10 said:
hey sbcs10 do you race you truck??????


i see you have spray on it are we gonna get a race off in the spring?:thumbsup:
Click to expand...

yea...i havent spary'd it yet thos cuz i blew the trans tuning. but it'll be fix over winter.


where are you. i'm in IL
 
You must log in or register to reply here.
Back
Top