the beginning of a 67 eleanor project..

Doctor

Doctor

Club Sponsor
Just finished making the engine/trans harness.. The motor is a ford Shelby gt500 crate engine, trans=4r70w, computer=03-04 mach 1 automatic.. This is only the beginning of a sweet project.. the owner wanted us to make the engine trans harness before he took the motor to the fab shop to shoehorn the motor in between the shock towers.. will have pics of the car and the build soon..



100_3901.jpg


roy (blumach1) made this sweet adaptor that allows me to put a ford gt throttle body (linkage/throttle cable) in place of the factory throttle by wire/smaller Shelby throttle body..

100_3907.jpg


100_3906.jpg


100_3905.jpg


100_3904.jpg


I used a ford gt inlet tube/jlt 110mm maf for the inlet (sweet!!!)
100_3909.jpg


100_3908.jpg


because i put a gt throttle body on the engine i had to integrate a iac motor somewhere (for driveability, etc..) so i took advantage of the factory egr port and simply drilled and taped some holes on the factory inlet..

100_3899.jpg


100_3898.jpg


100_3900.jpg


100_3902.jpg


100_3937.jpg


100_3940.jpg
 
blumachwon does great work...........jay we were talking about your project the other night , you take on some big jobs that always turn out top notch...
 
If your over on SVTPerformance.com you should throw up a post the guys would be psyched!


Looks good and cool idea on the adapter plate for the TB
 
oh btw if you need the side scoops I have brand new eleanor upper and lower fiberglass bond on sidescoops for a 67-68 fastback
 
You must log in or register to reply here.
Back
Top