th400/th350 convertor and c4 convertor

[jordanbmx]

B&M Nitrous Holeshot 3600 stall convertor with anti balloon plates for a th400/th350 trans. Convertor has 3k miles on it.
Retails for $499 on summit. $375
http://www.summitracing.com/parts/BMM-20482/
Unknown brand c4 nitrous convertor. Stalled at 4000 RPM behind my 302 on the trans brake, anti balloon plates and works flawlessly. Was on 164th flywheel $250

(734) 624-5506 call/text anytime
Thanks Jordan

 

[jordanbmx]

will trade for aftermarket ls oil pan or ctsv pan, coil packs, ls intake for carb aftermarket cam & springs or 243 heads

 

[jordanbmx]

Bump

 

[jordanbmx]

Pending sale on the B&M

 

[jordanbmx]

Phone hasnt rang at all today. Back up forsale

 

[jordanbmx]

bump

 

[jordanbmx]

New years bump

 

[BIGCOWL-IMP]

you know you can make that B&M convertor work with your ls motor right ??

 

[jordanbmx]

you know you can make that B&M convertor work with your ls motor right ??

so i've heard but i cant find anything online about it. any help?

 

[BIGCOWL-IMP]

Do u know who Jarvis is with the fast blue chevy van ?

 

[jordanbmx]

Do u know who Jarvis is with the fast blue chevy van ?

yeah

 

[BIGCOWL-IMP]

Back when i did my ls7 with my th350 trans i bought this flex plate....
http://www.jegs.com/webapp/wcs/stor...&Jnar=0&Ne=1+2+3+13+1147708&searchTerm=399753

see the small round spacer ? thats the piece you need to weld on your convertor to make it longer so it go`s in the end of your crank..........i had a buddy weld it on my old school convertor then i took it to Jarvis......he his a machine shop in his garage.............He has a lathe thats all set up to do convertors.......he trued it up and took about 2 minutes.......the piece was already the right length and worked perfect........or you could send it to B&M and let them do it ? Jarvis might be able to just make you the spacer but you still need a flex plate...

 

[jordanbmx]

Back when i did my ls7 with my th350 trans i bought this flex plate....
http://www.jegs.com/webapp/wcs/stor...&Jnar=0&Ne=1+2+3+13+1147708&searchTerm=399753

see the small round spacer ? thats the piece you need to weld on your convertor to make it longer so it go`s in the end of your crank..........i had a buddy weld it on my old school convertor then i took it to Jarvis......he his a machine shop in his garage.............He has a lathe thats all set up to do convertors.......he trued it up and took about 2 minutes.......the piece was already the right length and worked perfect........or you could send it to B&M and let them do it ? Jarvis might be able to just make you the spacer but you still need a flex plate...

thanks man thats deffinetly what im going to do

 

[dudek]

jordan you can also make a stock truck plate work too if moneys tight, what i did with mine.

 

[jordanbmx]

jordan you can also make a stock truck plate work too if moneys tight, what i did with mine.

Explain

 

[dudek]

theres a retarded amount of info on ls1tech...
ill explain more later

 

[jordanbmx]

bump!
keeping the sbc, sbf still forsale