jakefb
Club Member
Heads where done by birdie at flow technologies in Plymouth Michigan. Heads are fresh will be picking them up sept11th. They are machined with a o ring grove for wire loc gaskets. Come with t and d shaft mount rockers 1.7 intake and 1.65 exhaust. Have titanium intakes valves and stainless exhaust. heads intake runners have been raised and is now fitted with a matching Yates intake with a 4150 to 4500 adaptor springs are good up to .800 lift. I also have match pistons that can be sold with them that are 4.125 and was in a 427 with a 4 inch crank. Here are the numbers to the heads Intake runner volume is 226 cc. Combustion chambers are 51.5 cc.
Lift Intake Exhaust
.100 85 70
.200 150 115
.300 210 153
.400 263 196
.500 304 226
.600 334 240
.700 353 251
.800 360 261
heads intake valley tray cover rockers and carb adapter I’m looking for 3200 I will have pics Tuesday night looking to off load fast.
(810)824-0945 jake
Lift Intake Exhaust
.100 85 70
.200 150 115
.300 210 153
.400 263 196
.500 304 226
.600 334 240
.700 353 251
.800 360 261
heads intake valley tray cover rockers and carb adapter I’m looking for 3200 I will have pics Tuesday night looking to off load fast.
(810)824-0945 jake
